<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Well,</p>
<p>this may not be relevant, but worth saying at this point.</p>
<p>I have found that if you initialize a pi node while not supplying
the Pi board with enough current</p>
<p>during the initial start-up. Many things seem to go wrong.</p>
<p>I'm building a bigger 5v power supply to handle 2 or three of
these at once to verify what I'm thinking,</p>
<p>but not tested anything yet.</p>
<p>In my case, it is Dahdi</p>
<p>So, just something to look at and if it appears to be likely,</p>
<p>I would say get the required current supplied and start anew with
a fresh img.</p>
<p>Not sure if it helps, but something to look for.<br>
</p>
<p>...mike/kb8jnm<br>
</p>
<br>
<div class="moz-cite-prefix">On 7/8/2018 9:44 AM, JJC wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CAOb75Os4ht-DO2CJWCuGCR9bgyKnw8gVVJ5J=jP+5qaF3+g2=A@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=utf-8">
<div dir="ltr">Not sure why but the /dev/dsp1 seems to be
missing... I've installed oss-compat and tried a number of
things.. see below output...
<div><br>
</div>
<div>
<div>$ sudo uridiag</div>
<div>URIDiag, diagnostic program for the DMK Engineering URI</div>
<div>USB Radio Interface, version 0.9, 08/14/15</div>
<div><br>
</div>
<div>Found CM119 USB Radio Interface at 001/005</div>
<div>Unable to re-open DSP device 1: /dev/dsp1</div>
</div>
</div>
<br>
<div class="gmail_quote">
<div dir="ltr">On Sat, Jul 7, 2018 at 10:44 PM JJC <<a
href="mailto:cummingsj@gmail.com" moz-do-not-send="true">cummingsj@gmail.com</a>>
wrote:<br>
</div>
<blockquote class="gmail_quote" style="margin:0 0 0
.8ex;border-left:1px #ccc solid;padding-left:1ex">
<div dir="ltr">Didi a fresh install of the latest ASL from the
repo on a fresh install of raspbian on an RPI 3. The issue
is simple... the pi sees the URI but ASL seems to have
issues..
<div><br>
</div>
<div>I have included sample output from a variety of
commands below which clearly details the underlying OS
sees the URI as it should, and the given address etc...</div>
<div><br>
</div>
<div>see the example output below...
<div>
<div
style="font-size:small;text-decoration-style:initial;text-decoration-color:initial"><br>
</div>
<div
style="font-size:small;text-decoration-style:initial;text-decoration-color:initial">taken
from /var/log/asterisk/messages</div>
<div
style="font-size:small;text-decoration-style:initial;text-decoration-color:initial">
<div>[Jul 7 22:19:46] WARNING[6703] chan_usbradio.c:
Loaded parameters from usbradio_tune_usb.conf for
device usb .</div>
<div>[Jul 7 22:19:46] WARNING[6703] chan_usbradio.c:
Unable to re-open DSP device 1 (usb): No such file
or directory</div>
</div>
<br>
</div>
<div>
<div>$ cat /proc/asound/cards</div>
<div> 0 [ALSA ]: bcm2835_alsa - bcm2835 ALSA</div>
<div> bcm2835 ALSA</div>
<div> 1 [Device ]: USB-Audio - USB PnP Sound
Device</div>
<div> C-Media Electronics Inc. USB
PnP Sound Device at usb-3f980000.usb-1.1.3, full s</div>
</div>
<div><br>
</div>
<div>
<div>$ lsusb</div>
<div>Bus 001 Device 004: ID 0bda:2838 Realtek
Semiconductor Corp. RTL2838 DVB-T</div>
<div>Bus 001 Device 005: ID 0d8c:013a C-Media
Electronics, Inc.</div>
<div>Bus 001 Device 006: ID 0424:7800 Standard
Microsystems Corp.</div>
<div>Bus 001 Device 003: ID 0424:2514 Standard
Microsystems Corp. USB 2.0 Hub</div>
<div>Bus 001 Device 002: ID 0424:2514 Standard
Microsystems Corp. USB 2.0 Hub</div>
<div>Bus 001 Device 001: ID 1d6b:0002 Linux Foundation
2.0 root hub</div>
</div>
<div><br>
</div>
<div>
<div>$ cat /etc/asterisk/usbradio_tune_usb.conf</div>
<div>[usb]</div>
<div>; name=usb</div>
<div>; devicenum=1</div>
<div>devstr=1-1.1.3:1.0</div>
<div>rxmixerset=500</div>
<div>txmixaset=450</div>
<div>txmixbset=500</div>
<div>rxvoiceadj=0.557342</div>
<div>rxctcssadj=0.930165</div>
<div>txctcssadj=220</div>
<div>rxsquelchadj=754</div>
<div>fever=1</div>
</div>
</div>
<div><br>
</div>
<div><br>
</div>
</div>
</blockquote>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<br>
<pre wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a>
<a class="moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a class="moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre>
</blockquote>
<br>
</body>
</html>