<div dir="ltr">Well, you could take apart the radio and solder to the back of the mic jack, which I have done in the past, but if youre using it for an allstar node there will not be much purpose for the mic as it will only TX to the radios listening to the output frequency of the node, and will not be transmitted via any internet links.</div><br><div class="gmail_quote"><div dir="ltr">On Wed, Aug 8, 2018 at 8:58 PM William Becks <<a href="mailto:wllmbecks@gmail.com">wllmbecks@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div lang="EN-US" link="blue" vlink="purple"><div class="m_8466878068233227117WordSection1"><p class="MsoNormal">The iaxRpt app works really well but if you could interface at least the microphone line through a RIGblaster if you have one laying around. You obviously would not use the internal USB sound device if your blaster model is so equipped, but would rather just route the mic audio and PTT through the blaster and connect your stock microphone to the front mic port. The last option would be to homebrew a switchbox with a connector that fits your mic and a cable with an RJ45 plug to your radio and will only need to wire in DPDT toggle switch that will allow you to switch the transceivers mic and PTT lines between the local microphone and the URI.<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">Bill,<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal">WA8WG<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal"><u></u> <u></u></p><p class="MsoNormal"><b>From:</b> App_rpt-users <<a href="mailto:app_rpt-users-bounces@lists.allstarlink.org" target="_blank">app_rpt-users-bounces@lists.allstarlink.org</a>> <b>On Behalf Of </b>Noah Chalker<br><b>Sent:</b> Wednesday, August 8, 2018 7:44 PM<br><b>To:</b> <a href="mailto:app_rpt-users@lists.allstarlink.org" target="_blank">app_rpt-users@lists.allstarlink.org</a><br><b>Subject:</b> Re: [App_rpt-users] Using a handmic while using a URI<u></u><u></u></p><p class="MsoNormal"><u></u> <u></u></p><div><div><p class="MsoNormal">Bill and all,<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">It does not. The only ports are the RJ45 for the microphone and the speaker output on the back. The alternative is possible but I rather find a solution to using the stock mic. <u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">KE5VQL<u></u><u></u></p></div></div><p class="MsoNormal"><u></u> <u></u></p><div><div><p class="MsoNormal">On Wed, Aug 8, 2018 at 7:35 PM William Becks <<a href="mailto:wllmbecks@gmail.com" target="_blank">wllmbecks@gmail.com</a>> wrote:<u></u><u></u></p></div><blockquote style="border:none;border-left:solid #cccccc 1.0pt;padding:0in 0in 0in 6.0pt;margin-left:4.8pt;margin-right:0in"><div><div><p class="MsoNormal">Noah,<u></u><u></u></p><p class="MsoNormal"> <u></u><u></u></p><p class="MsoNormal">Does your radio have an auxiliary connector where you could connect the URI to leave your RJ45 connector free to use with the microphone? Alternatively, you might consider installing iaxRpt on one of your PC’s that will give you a desktop dispatch application type access to the radio over via the URI over your LAN. I do that here and it works great. <u></u><u></u></p><p class="MsoNormal"> <u></u><u></u></p><p class="MsoNormal">Bill, WA8WG<u></u><u></u></p><p class="MsoNormal"> <u></u><u></u></p><p class="MsoNormal"> <u></u><u></u></p><p class="MsoNormal"><b>From:</b> App_rpt-users <<a href="mailto:app_rpt-users-bounces@lists.allstarlink.org" target="_blank">app_rpt-users-bounces@lists.allstarlink.org</a>> <b>On Behalf Of </b>Noah Chalker<br><b>Sent:</b> Wednesday, August 8, 2018 7:21 PM<br><b>To:</b> <a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlink.org</a><br><b>Subject:</b> [App_rpt-users] Using a handmic while using a URI<u></u><u></u></p><p class="MsoNormal"> <u></u><u></u></p><div><div><p class="MsoNormal">Hey folks,<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">I am still planning out the setup for my node. One issue that came up is that of microphones. With the URI, I will have to connect it to the microphone jack of the radio using a RJ45 and to the speaker output. The speaker problem can be easily solved with a splitter. As far as the mic goes, I am a bit confused. If the URI is plugged into the mic port, I obviously cannot use the radio with a hand mic. Is there a way that I can simultaneously use the radio with a RJ45 mic connector at the same time that the URI is connected?<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">KE5VQL<u></u><u></u></p></div><div><p class="MsoNormal"> <u></u><u></u></p></div><div><p class="MsoNormal">Noah<u></u><u></u></p></div></div></div></div><p class="MsoNormal">_______________________________________________<br>App_rpt-users mailing list<br><a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlink.org</a><br><a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br><br>To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <u></u><u></u></p></blockquote></div><p class="MsoNormal"><br clear="all"><br>-- <u></u><u></u></p><div><p class="MsoNormal">From,<br> Noah Chalker<br>2Do not conform any longer to the pattern of this world, but be transformed by the renewing of your mind. Then you will be able to test and approve what God's will is—his good, pleasing and perfect will.<br>Romans 12:2<u></u><u></u></p></div></div></div>_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr">Ben</div><div>K2CPU</div></div></div></div></div></div>