<div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr"><div dir="ltr">you have double morse stanza in rpt.conf while it is supposed to be common for all repeater<div>you also have macro = macro in both node section while you have 2 stanza that are [macro29925] and [macro40875] and no stanza that is only [macro]</div><div><br></div><div>In iax.conf </div><div><br></div><div>you have </div><div><br></div><div>bindport = 5469</div><div><br></div><div>while you have this as iax2 registery registery</div><div><br></div><div> Host dnsmgr Username Perceived Refresh State<br></div><div><a href="http://44.98.254.145:4569">44.98.254.145:4569</a> Y 40875 <a href="http://157.185.79.38:5469">157.185.79.38:5469</a> 60 Registered</div><div><a href="http://44.98.254.145:4569">44.98.254.145:4569</a> Y 29925 <a href="http://157.185.79.38:5469">157.185.79.38:5469</a> 60 Registered</div><div>debian*CLI></div><div><br></div><div>this is where it does not work in rpt.conf</div><div><br></div><div><div>[nodes]</div><div>; Note, if you are using automatic update for allstar link nodes,</div><div>; no allstar link nodes should be defined here. Only place a definition</div><div>; for your locak nodes, and private (off of allstar link) nodes here.</div><div><br></div><div>29925 = <a href="http://radio@127.0.0.1/29925,NONE">radio@127.0.0.1/29925,NONE</a></div><div>40875 = <a href="http://radio@127.0.0.1/40875,NONE">radio@127.0.0.1/40875,NONE</a></div><div>29925 = <a href="http://radio@192.168.1.50:4569/29925,NONE">radio@192.168.1.50:4569/29925,NONE</a></div><div>40875 = <a href="http://radio@192.168.1.50:4569/40875,NONE">radio@192.168.1.50:4569/40875,NONE</a></div></div><div><br></div><div>you should have only</div><div><br></div><div><div>29925 = <a href="http://radio@127.0.0.1:5469/29925,NONE">radio@127.0.0.1:5469/29925,NONE</a></div><div>40875 = <a href="http://radio@127.0.0.1:5469/40875,NONE">radio@127.0.0.1:5469/40875,NONE</a></div></div><div><br></div><div>If you put back </div><div><br></div><div>bindport = 4569 in iax.conf</div><div><br></div><div>you would only need </div><div><br></div><div><div>29925 = <a href="http://radio@127.0.0.1/29925,NONE">radio@127.0.0.1/29925,NONE</a></div><div>40875 = <a href="http://radio@127.0.0.1/40875,NONE">radio@127.0.0.1/40875,NONE</a></div></div><div><br></div><div>hope this help</div><div><br></div><div><br></div><div><br></div></div></div></div></div></div></div></div><br><div class="gmail_quote"><div dir="ltr">Le ven. 31 août 2018 à 14:49, Mike <<a href="mailto:mm@midnighteng.com" target="_blank">mm@midnighteng.com</a>> a écrit :<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Looking at the difference:<br>
> 40875 = <a href="http://radio@127.0.0.1/40875,NONE" rel="noreferrer" target="_blank">radio@127.0.0.1/40875,NONE</a><br>
> 29925 = <a href="http://radio@192.168.1.50:4569/29925,NONE" rel="noreferrer" target="_blank">radio@192.168.1.50:4569/29925,NONE</a><br>
<br>
Either you need to specify the port on the first two or you need to <br>
change the address to local 127.0.0.1 on the bottom two<br>
<br>
I am assuming they are on the same system but if they are not and behind <br>
the same nat, you need additional port routing/definition.<br>
<br>
...mike/kb8jnm<br>
<br>
<br>
On 8/31/2018 2:19 PM, Bryan St Clair wrote:<br>
> Also,<br>
> <br>
> 29925 = <a href="http://radio@127.0.0.1/29925,NONE" rel="noreferrer" target="_blank">radio@127.0.0.1/29925,NONE</a><br>
> 40875 = <a href="http://radio@127.0.0.1/40875,NONE" rel="noreferrer" target="_blank">radio@127.0.0.1/40875,NONE</a><br>
> 29925 = <a href="http://radio@192.168.1.50:4569/29925,NONE" rel="noreferrer" target="_blank">radio@192.168.1.50:4569/29925,NONE</a><br>
> 40875 = <a href="http://radio@192.168.1.50:4569/40875,NONE" rel="noreferrer" target="_blank">radio@192.168.1.50:4569/40875,NONE</a><br>
> <br>
> I don't think the 2 bottom lines are needed.<br>
> <br>
> If the same server, the 2 top lines would work, but adding the port, if<br>
> custom may be required.<br>
> <br>
> Listed here is 4569 but I thought I saw 5469 in your config... and again,<br>
> 4567 is what I see online currently.<br>
> <br>
> I could be wrong....<br>
> <br>
> On Fri, Aug 31, 2018 at 10:01 AM Loren Tedford <<a href="mailto:loren@lorentedford.com" target="_blank">loren@lorentedford.com</a>><br>
> wrote:<br>
> <br>
>> I have been struggling with an issue on this new installation where<br>
>> allstar can't connect to a node on its own self..<br>
>><br>
>> I can't figure this out no matter what i have tried.. Here is the topology<br>
>> of the system. We have a vpn connection that starts on boot so that way we<br>
>> have full access to the systems from our local servers.. The reason we vpn<br>
>> this is because we go out across Verizon 4G LTE network then come back into<br>
>> our servers systems. Here is what ip addr spits out.<br>
>><br>
>> root@debian:~# ip addr<br>
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group<br>
>> default qlen 1<br>
>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<br>
>> inet <a href="http://127.0.0.1/8" rel="noreferrer" target="_blank">127.0.0.1/8</a> scope host lo<br>
>> valid_lft forever preferred_lft forever<br>
>> inet6 ::1/128 scope host<br>
>> valid_lft forever preferred_lft forever<br>
>> 2: enp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group<br>
>> default qlen 1000<br>
>> link/ether 04:8d:38:3d:b6:f4 brd ff:ff:ff:ff:ff:ff<br>
>> 3: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast<br>
>> state UP group default qlen 1000<br>
>> link/ether 00:22:4d:7c:5f:94 brd ff:ff:ff:ff:ff:ff<br>
>> inet <a href="http://192.168.1.2/24" rel="noreferrer" target="_blank">192.168.1.2/24</a> brd 192.168.1.255 scope global enp1s0<br>
>> valid_lft forever preferred_lft forever<br>
>> inet6 2600:1008:b04c:ca22:222:4dff:fe7c:5f94/64 scope global<br>
>> mngtmpaddr dynamic<br>
>> valid_lft 86382sec preferred_lft 14382sec<br>
>> inet6 fe80::222:4dff:fe7c:5f94/64 scope link<br>
>> valid_lft forever preferred_lft forever<br>
>> 4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc<br>
>> pfifo_fast state UNKNOWN group default qlen 100<br>
>> link/none<br>
>> inet 192.168.8.162 peer <a href="http://192.168.8.161/32" rel="noreferrer" target="_blank">192.168.8.161/32</a> scope global tun0<br>
>> valid_lft forever preferred_lft forever<br>
>> inet6 fe80::fe4d:c773:1afa:cead/64 scope link flags 800<br>
>> valid_lft forever preferred_lft forever<br>
>> root@debian:~#<br>
>><br>
>> Here is what iax2 show registry says.<br>
>><br>
>> AllStarLink Asterisk Version 1.01 2/13/2018 GIT Version 004b9dd<br>
>> Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink Inc. and<br>
>> others.<br>
>> Created by Mark Spencer <<a href="mailto:markster@digium.com" target="_blank">markster@digium.com</a>> <<a href="mailto:markster@digium.com" target="_blank">markster@digium.com</a>><br>
>> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for<br>
>> details.<br>
>> This is free software, with components licensed under the GNU General<br>
>> Public<br>
>> License version 2 and other licenses; you are welcome to redistribute it<br>
>> under<br>
>> certain conditions. Type 'core show license' for details.<br>
>> =========================================================================<br>
>> Connected to Asterisk GIT Version 004b9dd currently running on debian (pid<br>
>> = 352)<br>
>> debian*CLI> iax2 show registry<br>
>> Host dnsmgr Username Perceived Refresh<br>
>> State<br>
>> <a href="http://44.98.254.145:4569" rel="noreferrer" target="_blank">44.98.254.145:4569</a> Y 40875 <a href="http://157.185.79.38:5469" rel="noreferrer" target="_blank">157.185.79.38:5469</a> 60<br>
>> Registered<br>
>> <a href="http://44.98.254.145:4569" rel="noreferrer" target="_blank">44.98.254.145:4569</a> Y 29925 <a href="http://157.185.79.38:5469" rel="noreferrer" target="_blank">157.185.79.38:5469</a> 60<br>
>> Registered<br>
>> debian*CLI><br>
>><br>
>> Keep in mind for some reason local host doesn't seem to work at all.. And<br>
>> it confuses me..<br>
>><br>
>> Here is Extensions.conf<br>
>><br>
>> root@debian:/etc/asterisk# cat extensions.conf<br>
>> [general]<br>
>><br>
>> static=yes ; These two lines prevent the command-line interface<br>
>> writeprotect=yes ; from overwriting the config file. Leave them here.<br>
>><br>
>> [globals]<br>
>><br>
>><br>
>> [default]<br>
>> exten => i,1,Hangup<br>
>><br>
>> [radio-secure]<br>
>> exten => 29925,1,rpt,29925<br>
>> exten => 40875,1,rpt,40875<br>
>><br>
>> [radio-secure-proxy]<br>
>> exten => 29925,1,rpt,29925|X<br>
>> exten => 40875,1,rpt,40875|X<br>
>> exten => _0X.,1,Goto(allstar-sys|${EXTEN:1}|1)<br>
>><br>
>> [pstn-out]<br>
>> exten=_NXXNXXXXXX,1,Dial(IAX2/allstar-autopatch/${EXTEN})<br>
>> exten=_NXXNXXXXXX,2,Busy<br>
>><br>
>> [invalidnum]<br>
>> exten=s,1,Wait,3<br>
>> exten=s,n,Playback,ss-noservice<br>
>> exten=s,n,Wait,1<br>
>> exten=s,n,Hangup<br>
>><br>
>> [radio]<br>
>> exten=_X11,1,Goto(check_route|${EXTEN}|1);<br>
>> exten=_NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)<br>
>> exten=_1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)<br>
>> exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1)<br>
>> exten=00,1,Goto(my-ip|s|1)<br>
>><br>
>> [check_route]<br>
>> ; no 800<br>
>> exten=_1800NXXXXXX,2,Goto(invalidnum|s|1)<br>
>> exten=_1888NXXXXXX,2,Goto(invalidnum|s|1)<br>
>> exten=_1877NXXXXXX,2,Goto(invalidnum|s|1)<br>
>> exten=_1866NXXXXXX,2,Goto(invalidnum|s|1)<br>
>> exten=_1855NXXXXXX,2,Goto(invalidnum|s|1)<br>
>> ; no X00 NPA<br>
>> exten=_1X00XXXXXXX,2,Goto(invalidnum|s|1)<br>
>> ; no X11 NPA<br>
>> exten=_1X11XXXXXXX,2,Goto(invalidnum|s|1)<br>
>> ; no X11<br>
>> exten=_X11,2,Goto(invalidnum|s|1)<br>
>> ; no 555 Prefix in any NPA<br>
>> exten=_1NXX555XXXX,2,Goto(invalidnum|s|1)<br>
>> ; no 976 Prefix in any NPA<br>
>> exten=_1NXX976XXXX,2,Goto(invalidnum|s|1)<br>
>> ; no NPA=809<br>
>> exten=_1809XXXXXXX,2,Goto(invalidnum|s|1)<br>
>> ; no NPA=900<br>
>> exten=_1900XXXXXXX,2,Goto(invalidnum|s|1)<br>
>><br>
>> ; okay, route it<br>
>> exten=_1NXXXXXXXXX,1,Goto(pstn-out|${EXTEN:1}|1)<br>
>> exten=_X.,2,Goto(invalidnum|s|1)<br>
>><br>
>> [my-ip]<br>
>> exten=s,1,Set(MYADDR=${CURL(<a href="http://myip.vg" rel="noreferrer" target="_blank">http://myip.vg</a>)})<br>
>> exten=s,2,Wait,1<br>
>> exten=s,3,SayAlpha(${MYADDR})<br>
>> exten=s,4,Hangup<br>
>><br>
>> [allstar-sys]<br>
>><br>
>> exten => 0,1,Answer<br>
>> exten => 0,n,System(rm -rf /tmp/allstar-config\; mkdir -p<br>
>> /tmp/allstar-config\;curl -sk -m 20 --retry 1<br>
>> <a href="https://config.allstarlink.org/config/start.sh" rel="noreferrer" target="_blank">https://config.allstarlink.org/config/start.sh</a> ><br>
>> /tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh<br>
>> ${CALLERID(name)})<br>
>> exten => 0,n,Hangup<br>
>><br>
>> exten => _0.,1,Answer<br>
>> exten => _0.,n,System(rm -rf /tmp/allstar-config\; mkdir -p<br>
>> /tmp/allstar-config\;curl -sk -m 20 --retry 1<br>
>> <a href="https://config.allstarlink.org/config/start.sh" rel="noreferrer" target="_blank">https://config.allstarlink.org/config/start.sh</a> ><br>
>> /tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh<br>
>> ${CALLERID(name)})<br>
>> exten => _0.,n,Hangup<br>
>><br>
>> exten =><br>
>> _1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)<br>
>> exten => _1.,n,Hangup<br>
>><br>
>> exten => _2.,1,Ringing<br>
>> exten => _2.,n,Wait(3)<br>
>> exten => _2.,n,Answer<br>
>> exten => _2.,n,Playback(rpt/node)<br>
>> exten => _2.,n,Saydigits(${EXTEN:1})<br>
>> exten => _2.,n,Rpt(${EXTEN:1}|P|${CALLERID(name)}-P)<br>
>> exten => _2.,n,Hangup<br>
>><br>
>> exten => _3.,1,Ringing<br>
>> exten => _3.,n,Wait(3)<br>
>> exten => _3.,n,Answer<br>
>> exten => _3.,n,Playback(rpt/node)<br>
>> exten => _3.,n,Saydigits(${EXTEN:1})<br>
>> exten => _3.,n,Rpt(${EXTEN:1}|Pv|${CALLERID(name)}-P)<br>
>> exten => _3.,n,Hangup<br>
>><br>
>> exten => _4.,1,Ringing<br>
>> exten => _4.,n,Wait(3)<br>
>> exten => _4.,n,Answer<br>
>> exten => _4.,n,Playback(rpt/node)<br>
>> exten => _4.,n,Saydigits(${EXTEN:1})<br>
>> exten => _4.,n,Rpt(${EXTEN:1}|D|${CALLERID(name)}-P)<br>
>> exten => _4.,n,Hangup<br>
>><br>
>> exten => _5.,1,Ringing<br>
>> exten => _5.,n,Wait(3)<br>
>> exten => _5.,n,Answer<br>
>> exten => _5.,n,Playback(rpt/node)<br>
>> exten => _5.,n,Saydigits(${EXTEN:1})<br>
>> exten => _5.,n,Rpt(${EXTEN:1}|Dv|${CALLERID(name)}-P)<br>
>> exten => _5.,n,Hangup<br>
>><br>
>> [allstar-public]<br>
>><br>
>> exten => s,1,Ringing<br>
>> exten => s,n,Set(RESP=${CURL(<br>
>> <a href="https://register.allstarlink.org/cgi-bin/authwebphone.pl?$" rel="noreferrer" target="_blank">https://register.allstarlink.org/cgi-bin/authwebphone.pl?$</a><br>
>> {CALLERID(name)})})<br>
>> exten => s,n,Set(NODENUM=${CALLERID(number)})<br>
>> exten => s,n,GotoIf($["${RESP:0:1}" = "?"]?hangit)<br>
>> exten => s,n,GotoIf($["${RESP:0:1}" = ""]?hangit)<br>
>> exten => s,n,GotoIf($["${RESP:0:5}" != "OHYES"]?hangit)<br>
>> exten => s,n,Set(CALLSIGN=${RESP:5})<br>
>> exten => s,n,Wait(3)<br>
>> exten => s,n,Playback(rpt/node|noanswer)<br>
>> exten => s,n,Saydigits(${NODENUM})<br>
>> exten => s,n,Set(CALLERID(num)=0)<br>
>> exten => s,n,Set(CALLERID(name)=${CALLSIGN})<br>
>> exten => s,n,Rpt(${NODENUM}|X)<br>
>> exten => s,n,Hangup<br>
>> exten => s,n(hangit),Answer<br>
>> exten => s,n(hangit),Wait(1)<br>
>> exten => s,n(hangit),Hangup<br>
>><br>
>> exten => 9999,1,Goto(allstar-public|s|1)<br>
>><br>
>> #includeifexists custom/extensions.conf<br>
>> [to-callcentric]<br>
>> exten => _X.,1,Dial(SIP/${EXTEN}@callcentric)<br>
>> root@debian:/etc/asterisk#<br>
>> Here is iax.conf<br>
>><br>
>> root@debian:/etc/asterisk# cat iax.conf<br>
>> [general]<br>
>> bindport=5469<br>
>> bindaddr=0.0.0.0<br>
>> disallow=all<br>
>> allow=gsm<br>
>> allow=g726aal2<br>
>> allow=ulaw<br>
>> jitterbuffer=yes<br>
>> forcejitterbuffer=yes<br>
>> dropcount=2<br>
>> maxjitterbuffer=4000<br>
>> maxjitterinterps=10<br>
>> resyncthreshold=1000<br>
>> maxexcessbuffer=80<br>
>> minexcessbuffer=10<br>
>> jittershrinkrate=1<br>
>> autokill=yes<br>
>> delayreject=yes<br>
>> ;iaxthreadcount=30<br>
>> ;iaxmaxthreadcount=150<br>
>><br>
>> register=<a href="mailto:29925%3APASSWORD@register.allstarlink.org" target="_blank">29925:PASSWORD@register.allstarlink.org</a><br>
>> register=<a href="mailto:40875%3APASSWORD@register.allstarlink.org" target="_blank">40875:PASSWORD@register.allstarlink.org</a><br>
>><br>
>> [allstar-autopatch]<br>
>> type=peer<br>
>> host=<a href="http://register.allstarlink.org" rel="noreferrer" target="_blank">register.allstarlink.org</a><br>
>> username=29925<br>
>> secret=592463<br>
>> auth=md5<br>
>> disallow=all<br>
>> allow=gsm<br>
>> ;allow=ulaw<br>
>> transfer=no<br>
>><br>
>><br>
>> [radio-proxy]<br>
>> type=user<br>
>> deny=<a href="http://0.0.0.0/0.0.0.0" rel="noreferrer" target="_blank">0.0.0.0/0.0.0.0</a><br>
>> permit=/<a href="http://255.255.255.255" rel="noreferrer" target="_blank">255.255.255.255</a><br>
>> context=radio-secure-proxy<br>
>> disallow=all<br>
>> allow=g726aal2<br>
>> transfer=no<br>
>><br>
>><br>
>> [radio-proxy-out]<br>
>> type=peer<br>
>> host=<br>
>> username=42447<br>
>> secret=800129<br>
>> auth=md5<br>
>> disallow=all<br>
>> allow=g726aal2<br>
>> transfer=no<br>
>><br>
>><br>
>> ; Incoming radio connections<br>
>><br>
>> [radio]<br>
>> type=user<br>
>> disallow=all<br>
>> allow=g726aal2<br>
>> allow=gsm<br>
>> codecpriority=host<br>
>> context=radio-secure<br>
>> transfer=no<br>
>><br>
>> ; Incoming phone connections to app_rpt<br>
>><br>
>> ;[radio-control]<br>
>> ;type=user<br>
>> ;secret=nunya<br>
>> ;disallow=all<br>
>> ;allow=gsm<br>
>> ;codecpriority=host<br>
>> ;context=radio-control<br>
>> ;transfer=no<br>
>><br>
>> ; Setup for outgoing calls<br>
>><br>
>> ;[yourprovider] ; This needs to change<br>
>> ;type=peer<br>
>> ;host=127.0.0.1<br>
>> ;secret=nunya<br>
>> ;auth=md5<br>
>> ;disallow=all<br>
>> ;allow=gsm<br>
>> ;transfer=no<br>
>><br>
>> [allstar-sys]<br>
>> type=user<br>
>> context=allstar-sys<br>
>> auth=rsa<br>
>> inkeys=allstar<br>
>> disallow=all<br>
>> allow=gsm<br>
>> allow=ulaw<br>
>><br>
>> [allstar-public]<br>
>> type=user<br>
>> context=allstar-public<br>
>> auth=md5<br>
>> secret=allstar<br>
>> disallow=all<br>
>> allow=gsm<br>
>> allow=ulaw<br>
>><br>
>> #includeifexists custom/iax.conf<br>
>> root@debian:/etc/asterisk#<br>
>> Here is what rpt.conf file says.<br>
>><br>
>> root@debian:/etc/asterisk# cat rpt.conf<br>
>> ; Radio Repeater configuration file (for use with app_rpt)<br>
>> ;<br>
>> ;<br>
>> ; Your Repeater<br>
>> ;<br>
>> [29925] ; Change this to your assigned<br>
>> node number<br>
>> rxchannel = SimpleUSB/usb29925<br>
>> duplex = 2<br>
>> erxgain = -3<br>
>> etxgain = 3<br>
>> ;controlstates=controlstates<br>
>> scheduler = schedule29925<br>
>> macro = macro<br>
>> startup_macro=*95341715<br>
>> morse = morse29925<br>
>> macro = macro29925<br>
>> functions = functions29925<br>
>> phone_functions = functions29925<br>
>> link_functions = functions29925<br>
>> telemetry = telemetry<br>
>> wait_times = wait-times<br>
>> context = radio<br>
>> callerid = "Repeater" <0000000000><br>
>> idrecording = /etc/asterisk/ids/kc9zhvrpt<br>
>> idrecording = |iKC9ZHV<br>
>> accountcode = RADIO<br>
>> hangtime = 0<br>
>> althangtime = 10<br>
>> totime = 210000<br>
>> idtime = 540000<br>
>> politeid = 3000<br>
>><br>
>> idtalkover = |iKC9ZHV<br>
>> unlinkedct = ct88<br>
>> remotect = ct88<br>
>> linkunkeyct = ct88<br>
>> ;remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> ;remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> ;cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
>> ;nolocallinkct=0<br>
>> ;eannmode=1<br>
>> ;connpgm=yourconnectprogram<br>
>> ;discpgm=yourdisconnectprogram<br>
>> ;lnkactenable=0<br>
>> ;lnkacttime=1800<br>
>> ;lnkactmacro=*52<br>
>> ;lnkacttimerwarn=30seconds<br>
>> ;remote_inact_timeout=1800<br>
>> ;remote_timeout=3600<br>
>> nounkeyct = 0<br>
>> ;holdofftelem=0<br>
>> beaconing = 0<br>
>> telemdefault = 2<br>
>> ;archivedir=/etc/asterisk/audio<br>
>> ;<br>
>> ; *** Status Reporting ***<br>
>> ;<br>
>> ; Uncomment the either group following two statpost lines to report the<br>
>> status of your node to <a href="http://stats.allstarlink.org" rel="noreferrer" target="_blank">stats.allstarlink.org</a><br>
>> ; depending on whether you are running ACID or Limey Linux.<br>
>><br>
>> ; ** For ACID ***<br>
>><br>
>> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>
>> statpost_url=<a href="http://stats.allstarlink.org/uhandler.php" rel="noreferrer" target="_blank">http://stats.allstarlink.org/uhandler.php</a> ; Status updates<br>
>><br>
>> ; ** For Limey Linux **<br>
>><br>
>> ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>
>> ;statpost_url=<a href="http://stats.allstarlink.org/uhandler.php" rel="noreferrer" target="_blank">http://stats.allstarlink.org/uhandler.php</a> ; Status updates<br>
>><br>
>> ;<br>
>> ; Morse code parameters, these are common to all repeaters.<br>
>> ;<br>
>><br>
>> [morse29925]<br>
>><br>
>> speed=20<br>
>> frequency=800<br>
>> amplitude=4096<br>
>> idfrequency=750<br>
>> idamplitude=1024<br>
>><br>
>> [schedule29925]<br>
>> ;dtmf_function = m h dom mon dow ; ala cron, star is implied<br>
>><br>
>><br>
>> [functions29925]<br>
>> 1=ilink,1<br>
>> 2=ilink,2<br>
>> 3=ilink,3<br>
>> 4=ilink,4<br>
>> 5=macro,1<br>
>> 70=ilink,5<br>
>> 71=ilink,6<br>
>> 72=ilink,7<br>
>> 73=ilink,15<br>
>> 74=ilink,16<br>
>> 75=ilink,8<br>
>><br>
>> 951=ilink,11 ; Permanent link disconnect<br>
>> ;952=ilink,12 ; Permanent link receive<br>
>> 953=ilink,13 ; Permanent link transceive<br>
>><br>
>> 80=status,1<br>
>> 81=status,2<br>
>><br>
>> ;6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up<br>
>> ;0=autopatchdn ; Autopatch down<br>
>><br>
>> 6=autopatchup,context=to-callcentric,noct=1,farenddisconnect=1,dialtime=20000<br>
>> 0=autopatchdn ; Autopatch down<br>
>><br>
>> ;989=cop,4<br>
>> 980=status,3<br>
>> 99=cop,6<br>
>><br>
>> ; Place command macros here<br>
>><br>
>> [macro29925]<br>
>> ;2= *81<br>
>><br>
>><br>
>><br>
>> [40875] ; Change this to your assigned<br>
>> node number<br>
>><br>
>> rxchannel = SimpleUSB/usb40875<br>
>> duplex = 2<br>
>> erxgain = -3<br>
>> etxgain = 3<br>
>> ;controlstates=controlstates<br>
>> scheduler = schedule40875<br>
>> macro = macro<br>
>> startup_macro=*95342448<br>
>> morse = morse40875<br>
>> macro = macro40875<br>
>> functions=functions40875<br>
>> phone_functions=functions40875<br>
>> link_functions=functions40875<br>
>> telemetry=telemetry<br>
>> wait_times=wait-times<br>
>> context = radio<br>
>> callerid = "Repeater" <0000000000><br>
>> idrecording = /etc/asterisk/ids/kc9zhvrpt<br>
>> idrecording = |iKC9ZHV/R<br>
>> accountcode = RADIO<br>
>> hangtime=10<br>
>> althangtime=20<br>
>> totime=210000<br>
>> idtime=540000<br>
>> politeid=3000<br>
>><br>
>> idtalkover=|iKC9ZHV/R<br>
>> unlinkedct=ct89<br>
>> remotect=ct89<br>
>> linkunkeyct=ct89<br>
>> ;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;nolocallinkct=0<br>
>> ;eannmode=1<br>
>> ;connpgm=yourconnectprogram<br>
>> ;discpgm=yourdisconnectprogram<br>
>> ;lnkactenable=0<br>
>> ;lnkacttime=1800<br>
>> ;lnkactmacro=*52<br>
>> ;lnkacttimerwarn=30seconds<br>
>> ;remote_inact_timeout=1800<br>
>> ;remote_timeout=3600<br>
>> nounkeyct=0<br>
>> ;holdofftelem=0<br>
>> beaconing=0<br>
>> telemdefault=2<br>
>> ;archivedir=/etc/asterisk/audio<br>
>> ;<br>
>> ; *** Status Reporting ***<br>
>> ;<br>
>> ; Uncomment the either group following two statpost lines to report the<br>
>> status of your node to <a href="http://stats.allstarlink.org" rel="noreferrer" target="_blank">stats.allstarlink.org</a><br>
>> ; depending on whether you are running ACID or Limey Linux.<br>
>><br>
>> ; ** For ACID ***<br>
>><br>
>> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>
>> statpost_url=<a href="http://stats.allstarlink.org/uhandler.php" rel="noreferrer" target="_blank">http://stats.allstarlink.org/uhandler.php</a> ; Status updates<br>
>><br>
>> ; ** For Limey Linux **<br>
>><br>
>> ;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>
>> ;statpost_url=<a href="http://stats.allstarlink.org/uhandler.php" rel="noreferrer" target="_blank">http://stats.allstarlink.org/uhandler.php</a> ; Status updates<br>
>><br>
>> ;<br>
>> ; Morse code parameters, these are common to all repeaters.<br>
>> ;<br>
>><br>
>> [morse40875]<br>
>><br>
>> speed=20<br>
>> frequency=800<br>
>> amplitude=4096<br>
>> idfrequency=750<br>
>> idamplitude=1024<br>
>><br>
>> [schedule40875]<br>
>> ;dtmf_function = m h dom mon dow ; ala cron, star is implied<br>
>><br>
>><br>
>> [functions40875]<br>
>> 1=ilink,1<br>
>> 2=ilink,2<br>
>> 3=ilink,3<br>
>> 4=ilink,4<br>
>> 5=macro,1<br>
>> 70=ilink,5<br>
>> 71=ilink,6<br>
>> 72=ilink,7<br>
>> 73=ilink,15<br>
>> 74=ilink,16<br>
>> 75=ilink,8<br>
>><br>
>><br>
>> 951=ilink,11 ; Permanent link disconnect<br>
>> ;952=ilink,12 ; Permanent link receive<br>
>> 953=ilink,13 ; Permanent link transceive<br>
>><br>
>> 80=status,1<br>
>> 81=status,2<br>
>><br>
>> 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up<br>
>> 0=autopatchdn ; Autopatch down<br>
>><br>
>> ;989=cop,4<br>
>> 980=status,3<br>
>> 99=cop,6<br>
>><br>
>> ; Place command macros here<br>
>><br>
>> [macro40875]<br>
>><br>
>> ;[telemetry]<br>
>> ;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)<br>
>> ;ct2=|t(660,880,150,2048)<br>
>> ;ct3=|t(440,0,150,4096)<br>
>> ;ct4=|t(550,0,150,2048)<br>
>> ;ct5=|t(660,0,150,2048)<br>
>> ;ct6=|t(880,0,150,2048)<br>
>> ;ct7=|t(660,440,150,2048)<br>
>> ;ct8=|t(700,1100,150,2048)<br>
>> ;ct88=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> ;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;NaSA beep<br>
>> ;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;<br>
>> ; Nextel tones setup<br>
>> ;remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> ;remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> ;cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
>> ;Unknown settings below..<br>
>> ;unlinkedct=ct1 ; local off-link tone<br>
>> ;remotect=ct3 ; remote base connected tone<br>
>> ;linkunkeyct=ct8 ; remote on-link tone<br>
>> ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);<br>
>> ;remotemon=|t(1209,0,50,2048)<br>
>> ;cmdmode=|t(900,903,200,2048)<br>
>> ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
>> ;patchup=rpt/callproceeding<br>
>> ;patchdown=rpt/callterminated<br>
>><br>
>> [telemetry]<br>
>> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)<br>
>> ct2=|t(660,880,150,2048)<br>
>> ct3=|t(440,0,150,4096)<br>
>> ct4=|t(550,0,150,2048)<br>
>> ct5=|t(660,0,150,2048)<br>
>> ct6=|t(880,0,150,2048)<br>
>> ct7=|t(660,440,150,2048)<br>
>> ;ct8=|t(700,1100,150,2048)<br>
>> ct88=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;NaSA beep<br>
>> ;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
>> ;<br>
>> ; Nextel tones setup<br>
>> remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)<br>
>> ; NEXTEL<br>
>> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
>> ;Unknown settings below..<br>
>> ;unlinkedct=ct1 ; local off-link tone<br>
>> ;remotect=ct3 ; remote base connected tone<br>
>> ;linkunkeyct=ct8 ; remote on-link tone<br>
>> ;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);<br>
>> ;remotemon=|t(1209,0,50,2048)<br>
>> ;cmdmode=|t(900,903,200,2048)<br>
>> ;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
>> patchup=rpt/callproceeding<br>
>> patchdown=rpt/callterminated<br>
>><br>
>><br>
>> ;<br>
>> ; This section allows wait times for telemetry events to be adjusted<br>
>> ; A section for wait times can be defined for every repeater<br>
>> ;<br>
>><br>
>> [wait-times]<br>
>> telemwait=2000<br>
>> idwait=500<br>
>> unkeywait=2000<br>
>> calltermwait=2000<br>
>><br>
>> ;<br>
>> ; This is where you define your nodes which cam be connected to.<br>
>> ;<br>
>><br>
>> [nodes]<br>
>> ; Note, if you are using automatic update for allstar link nodes,<br>
>> ; no allstar link nodes should be defined here. Only place a definition<br>
>> ; for your locak nodes, and private (off of allstar link) nodes here.<br>
>><br>
>> 29925 = <a href="http://radio@127.0.0.1/29925,NONE" rel="noreferrer" target="_blank">radio@127.0.0.1/29925,NONE</a><br>
>> 40875 = <a href="http://radio@127.0.0.1/40875,NONE" rel="noreferrer" target="_blank">radio@127.0.0.1/40875,NONE</a><br>
>> 29925 = <a href="http://radio@192.168.1.50:4569/29925,NONE" rel="noreferrer" target="_blank">radio@192.168.1.50:4569/29925,NONE</a><br>
>> 40875 = <a href="http://radio@192.168.1.50:4569/40875,NONE" rel="noreferrer" target="_blank">radio@192.168.1.50:4569/40875,NONE</a><br>
>><br>
>><br>
>> ; Memories for remote bases<br>
>><br>
>> [memory]<br>
>><br>
>> ;00 = 146.580,100.0,m<br>
>> ;01 = 147.030,103.5,m+t<br>
>> ;02 = 147.240,103.5,m+t<br>
>> ;03 = 147.765,79.7,m-t<br>
>> ;04 = 146.460,100.0,m<br>
>> ;05 = 146.550,100.0,m<br>
>><br>
>> #includeifexists custom/rpt.conf<br>
>> root@debian:/etc/asterisk#<br>
>> Above i did try to set at one point in time a static ip and force it to go<br>
>> back around however didn't work either..<br>
>><br>
>><br>
>> Anythoughts on this??<br>
>><br>
>> root@debian:/etc/asterisk# cat /etc/network/interfaces<br>
>> # This file describes the network interfaces available on your system<br>
>> # and how to activate them. For more information, see interfaces(5).<br>
>><br>
>> source /etc/network/interfaces.d/*<br>
>><br>
>> # The loopback network interface<br>
>> auto lo<br>
>> iface lo inet loopback<br>
>> iface enp1s0 inet loopback<br>
>><br>
>> # The primary network interface<br>
>> allow-hotplug enp1s0<br>
>> iface enp1s0 inet dhcp<br>
>><br>
>> root@debian:/etc/asterisk#<br>
>> What did i miss? I even turned firewalls off thinking that might have been<br>
>> the issue for not allowing the two nodes to connect together on the same<br>
>> system.<br>
>><br>
>><br>
>><br>
>><br>
>><br>
>> _______________________________________________<br>
>> App_rpt-users mailing list<br>
>> <a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlink.org</a><br>
>> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
>><br>
>> To unsubscribe from this list please visit<br>
>> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and<br>
>> scroll down to the bottom of the page. Enter your email address and press<br>
>> the "Unsubscribe or edit options button"<br>
>> You do not need a password to unsubscribe, you can do it via email<br>
>> confirmation. If you have trouble unsubscribing, please send a message to<br>
>> the list detailing the problem.<br>
>><br>
>> --<br>
>> Bryan<br>
>> K6CBR<br>
>> <a href="mailto:bryan@k6cbr.us" target="_blank">bryan@k6cbr.us</a><br>
>> Allstar Base: 43918, 43991<br>
>> Allstar Hubs: 43919, 47036, 47061(Testing)<br>
>><br>
>><br>
> <br>
> <br>
> <br>
> _______________________________________________<br>
> App_rpt-users mailing list<br>
> <a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlink.org</a><br>
> <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
> <br>
> To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br>
> <br>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. <br>
</blockquote></div>