<div dir="ltr">Also,<div><br><div><span style="font-size:x-small">29925 = </span><a class="gmail-m_561760623631938506moz-txt-link-abbreviated" href="mailto:radio@127.0.0.1/29925,NONE" target="_blank" style="font-size:x-small">radio@127.0.0.1/29925,NONE</a><br style="font-size:x-small"><span style="font-size:x-small">40875 = </span><a class="gmail-m_561760623631938506moz-txt-link-abbreviated" href="mailto:radio@127.0.0.1/40875,NONE" target="_blank" style="font-size:x-small">radio@127.0.0.1/40875,NONE</a><br style="font-size:x-small"><span style="font-size:x-small">29925 = </span><a class="gmail-m_561760623631938506moz-txt-link-abbreviated" href="mailto:radio@192.168.1.50:4569/29925,NONE" target="_blank" style="font-size:x-small">radio@192.168.1.50:4569/29925,NONE</a><br style="font-size:x-small"><span style="font-size:x-small">40875 = </span><a class="gmail-m_561760623631938506moz-txt-link-abbreviated" href="mailto:radio@192.168.1.50:4569/40875,NONE" target="_blank" style="font-size:x-small">radio@192.168.1.50:4569/40875,NONE</a><br></div><div><br></div><div>I don't think the 2 bottom lines are needed.</div><div><br></div><div>If the same server, the 2 top lines would work, but adding the port, if custom may be required.</div></div><div><br></div><div>Listed here is 4569 but I thought I saw 5469 in your config... and again, 4567 is what I see online currently.</div><div><br></div><div>I could be wrong....</div></div><br><div class="gmail_quote"><div dir="ltr">On Fri, Aug 31, 2018 at 10:01 AM Loren Tedford <<a href="mailto:loren@lorentedford.com">loren@lorentedford.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div text="#000000" bgcolor="#FFFFFF">
<p>I have been struggling with an issue on this new installation
where allstar can't connect to a node on its own self.. <br>
</p>
<p>I can't figure this out no matter what i have tried.. Here is the
topology of the system. We have a vpn connection that starts on
boot so that way we have full access to the systems from our local
servers.. The reason we vpn this is because we go out across
Verizon 4G LTE network then come back into our servers systems.
Here is what ip addr spits out.</p>
<p><font size="-2">root@debian:~# ip addr<br>
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
state UNKNOWN group default qlen 1<br>
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00<br>
inet <a href="http://127.0.0.1/8" target="_blank">127.0.0.1/8</a> scope host lo<br>
valid_lft forever preferred_lft forever<br>
inet6 ::1/128 scope host<br>
valid_lft forever preferred_lft forever<br>
2: enp3s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state
DOWN group default qlen 1000<br>
link/ether 04:8d:38:3d:b6:f4 brd ff:ff:ff:ff:ff:ff<br>
3: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc pfifo_fast state UP group default qlen 1000<br>
link/ether 00:22:4d:7c:5f:94 brd ff:ff:ff:ff:ff:ff<br>
inet <a href="http://192.168.1.2/24" target="_blank">192.168.1.2/24</a> brd 192.168.1.255 scope global enp1s0<br>
valid_lft forever preferred_lft forever<br>
inet6 2600:1008:b04c:ca22:222:4dff:fe7c:5f94/64 scope global
mngtmpaddr dynamic<br>
valid_lft 86382sec preferred_lft 14382sec<br>
inet6 fe80::222:4dff:fe7c:5f94/64 scope link<br>
valid_lft forever preferred_lft forever<br>
4: tun0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu
1500 qdisc pfifo_fast state UNKNOWN group default qlen 100<br>
link/none<br>
inet 192.168.8.162 peer <a href="http://192.168.8.161/32" target="_blank">192.168.8.161/32</a> scope global tun0<br>
valid_lft forever preferred_lft forever<br>
inet6 fe80::fe4d:c773:1afa:cead/64 scope link flags 800<br>
valid_lft forever preferred_lft forever<br>
root@debian:~#</font><br>
</p>
<p>Here is what iax2 show registry says.</p>
<p><font size="-2">AllStarLink Asterisk Version 1.01 2/13/2018 GIT
Version 004b9dd<br>
Copyright (C) 1999 - 2018 Digium, Inc. Jim Dixon, AllStarLink
Inc. and others.<br>
Created by Mark Spencer <a class="m_561760623631938506moz-txt-link-rfc2396E" href="mailto:markster@digium.com" target="_blank"><markster@digium.com></a><br>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show
warranty' for details.<br>
This is free software, with components licensed under the GNU
General Public<br>
License version 2 and other licenses; you are welcome to
redistribute it under<br>
certain conditions. Type 'core show license' for details.<br>
=========================================================================<br>
Connected to Asterisk GIT Version 004b9dd currently running on
debian (pid = 352)<br>
debian*CLI> iax2 show registry<br>
Host dnsmgr Username Perceived
Refresh State<br>
<a href="http://44.98.254.145:4569" target="_blank">44.98.254.145:4569</a> Y 40875
<a href="http://157.185.79.38:5469" target="_blank">157.185.79.38:5469</a> 60 Registered<br>
<a href="http://44.98.254.145:4569" target="_blank">44.98.254.145:4569</a> Y 29925
<a href="http://157.185.79.38:5469" target="_blank">157.185.79.38:5469</a> 60 Registered<br>
debian*CLI></font><br>
<br>
</p>
<p>Keep in mind for some reason local host doesn't seem to work at
all.. And it confuses me.. <br>
</p>
<p>Here is Extensions.conf<br>
</p>
<p><font size="-2">root@debian:/etc/asterisk# cat extensions.conf<br>
[general]<br>
<br>
static=yes ; These two lines prevent the command-line
interface<br>
writeprotect=yes ; from overwriting the config file. Leave them
here.<br>
<br>
[globals]<br>
<br>
<br>
[default]<br>
exten => i,1,Hangup<br>
<br>
[radio-secure]<br>
exten => 29925,1,rpt,29925<br>
exten => 40875,1,rpt,40875<br>
<br>
[radio-secure-proxy]<br>
exten => 29925,1,rpt,29925|X<br>
exten => 40875,1,rpt,40875|X<br>
exten => _0X.,1,Goto(allstar-sys|${EXTEN:1}|1)<br>
<br>
[pstn-out]<br>
exten=_NXXNXXXXXX,1,Dial(IAX2/allstar-autopatch/${EXTEN})<br>
exten=_NXXNXXXXXX,2,Busy<br>
<br>
[invalidnum]<br>
exten=s,1,Wait,3<br>
exten=s,n,Playback,ss-noservice<br>
exten=s,n,Wait,1<br>
exten=s,n,Hangup<br>
<br>
[radio]<br>
exten=_X11,1,Goto(check_route|${EXTEN}|1);<br>
exten=_NXXXXXX,1,Goto(check_route|1${HOMENPA}${EXTEN}|1)<br>
exten=_1XXXXXXXXXX,1,Goto(check_route|${EXTEN}|1)<br>
exten=_07XX,1,Goto(parkedcalls|${EXTEN:1}|1)<br>
exten=00,1,Goto(my-ip|s|1)<br>
<br>
[check_route]<br>
; no 800<br>
exten=_1800NXXXXXX,2,Goto(invalidnum|s|1)<br>
exten=_1888NXXXXXX,2,Goto(invalidnum|s|1)<br>
exten=_1877NXXXXXX,2,Goto(invalidnum|s|1)<br>
exten=_1866NXXXXXX,2,Goto(invalidnum|s|1)<br>
exten=_1855NXXXXXX,2,Goto(invalidnum|s|1)<br>
; no X00 NPA<br>
exten=_1X00XXXXXXX,2,Goto(invalidnum|s|1)<br>
; no X11 NPA<br>
exten=_1X11XXXXXXX,2,Goto(invalidnum|s|1)<br>
; no X11<br>
exten=_X11,2,Goto(invalidnum|s|1)<br>
; no 555 Prefix in any NPA<br>
exten=_1NXX555XXXX,2,Goto(invalidnum|s|1)<br>
; no 976 Prefix in any NPA<br>
exten=_1NXX976XXXX,2,Goto(invalidnum|s|1)<br>
; no NPA=809<br>
exten=_1809XXXXXXX,2,Goto(invalidnum|s|1)<br>
; no NPA=900<br>
exten=_1900XXXXXXX,2,Goto(invalidnum|s|1)<br>
<br>
; okay, route it<br>
exten=_1NXXXXXXXXX,1,Goto(pstn-out|${EXTEN:1}|1)<br>
exten=_X.,2,Goto(invalidnum|s|1)<br>
<br>
[my-ip]<br>
exten=s,1,Set(MYADDR=${CURL(<a class="m_561760623631938506moz-txt-link-freetext" href="http://myip.vg" target="_blank">http://myip.vg</a>)})<br>
exten=s,2,Wait,1<br>
exten=s,3,SayAlpha(${MYADDR})<br>
exten=s,4,Hangup<br>
<br>
[allstar-sys]<br>
<br>
exten => 0,1,Answer<br>
exten => 0,n,System(rm -rf /tmp/allstar-config\; mkdir -p
/tmp/allstar-config\;curl -sk -m 20 --retry 1
<a class="m_561760623631938506moz-txt-link-freetext" href="https://config.allstarlink.org/config/start.sh" target="_blank">https://config.allstarlink.org/config/start.sh</a> >
/tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh
${CALLERID(name)})<br>
exten => 0,n,Hangup<br>
<br>
exten => _0.,1,Answer<br>
exten => _0.,n,System(rm -rf /tmp/allstar-config\; mkdir -p
/tmp/allstar-config\;curl -sk -m 20 --retry 1
<a class="m_561760623631938506moz-txt-link-freetext" href="https://config.allstarlink.org/config/start.sh" target="_blank">https://config.allstarlink.org/config/start.sh</a> >
/tmp/allstar-config/start.sh\;sh /tmp/allstar-config/start.sh
${CALLERID(name)})<br>
exten => _0.,n,Hangup<br>
<br>
exten =>
_1.,1,Rpt(${EXTEN:1}|Rrpt/node:NODE:rpt/in-call:digits/0:PARKED|120)<br>
exten => _1.,n,Hangup<br>
<br>
exten => _2.,1,Ringing<br>
exten => _2.,n,Wait(3)<br>
exten => _2.,n,Answer<br>
exten => _2.,n,Playback(rpt/node)<br>
exten => _2.,n,Saydigits(${EXTEN:1})<br>
exten => _2.,n,Rpt(${EXTEN:1}|P|${CALLERID(name)}-P)<br>
exten => _2.,n,Hangup<br>
<br>
exten => _3.,1,Ringing<br>
exten => _3.,n,Wait(3)<br>
exten => _3.,n,Answer<br>
exten => _3.,n,Playback(rpt/node)<br>
exten => _3.,n,Saydigits(${EXTEN:1})<br>
exten => _3.,n,Rpt(${EXTEN:1}|Pv|${CALLERID(name)}-P)<br>
exten => _3.,n,Hangup<br>
<br>
exten => _4.,1,Ringing<br>
exten => _4.,n,Wait(3)<br>
exten => _4.,n,Answer<br>
exten => _4.,n,Playback(rpt/node)<br>
exten => _4.,n,Saydigits(${EXTEN:1})<br>
exten => _4.,n,Rpt(${EXTEN:1}|D|${CALLERID(name)}-P)<br>
exten => _4.,n,Hangup<br>
<br>
exten => _5.,1,Ringing<br>
exten => _5.,n,Wait(3)<br>
exten => _5.,n,Answer<br>
exten => _5.,n,Playback(rpt/node)<br>
exten => _5.,n,Saydigits(${EXTEN:1})<br>
exten => _5.,n,Rpt(${EXTEN:1}|Dv|${CALLERID(name)}-P)<br>
exten => _5.,n,Hangup<br>
<br>
[allstar-public]<br>
<br>
exten => s,1,Ringing<br>
exten =>
s,n,Set(RESP=${CURL(<a class="m_561760623631938506moz-txt-link-freetext" href="https://register.allstarlink.org/cgi-bin/authwebphone.pl?$" target="_blank">https://register.allstarlink.org/cgi-bin/authwebphone.pl?$</a>{CALLERID(name)})})<br>
exten => s,n,Set(NODENUM=${CALLERID(number)})<br>
exten => s,n,GotoIf($["${RESP:0:1}" = "?"]?hangit)<br>
exten => s,n,GotoIf($["${RESP:0:1}" = ""]?hangit)<br>
exten => s,n,GotoIf($["${RESP:0:5}" != "OHYES"]?hangit)<br>
exten => s,n,Set(CALLSIGN=${RESP:5})<br>
exten => s,n,Wait(3)<br>
exten => s,n,Playback(rpt/node|noanswer)<br>
exten => s,n,Saydigits(${NODENUM})<br>
exten => s,n,Set(CALLERID(num)=0)<br>
exten => s,n,Set(CALLERID(name)=${CALLSIGN})<br>
exten => s,n,Rpt(${NODENUM}|X)<br>
exten => s,n,Hangup<br>
exten => s,n(hangit),Answer<br>
exten => s,n(hangit),Wait(1)<br>
exten => s,n(hangit),Hangup<br>
<br>
exten => 9999,1,Goto(allstar-public|s|1)<br>
<br>
#includeifexists custom/extensions.conf<br>
[to-callcentric]<br>
exten => _X.,1,Dial(SIP/${EXTEN}@callcentric)<br>
root@debian:/etc/asterisk#<br>
</font>Here is iax.conf<br>
</p>
<p><font size="-2">root@debian:/etc/asterisk# cat iax.conf<br>
[general]<br>
bindport=5469<br>
bindaddr=0.0.0.0<br>
disallow=all<br>
allow=gsm<br>
allow=g726aal2<br>
allow=ulaw<br>
jitterbuffer=yes<br>
forcejitterbuffer=yes<br>
dropcount=2<br>
maxjitterbuffer=4000<br>
maxjitterinterps=10<br>
resyncthreshold=1000<br>
maxexcessbuffer=80<br>
minexcessbuffer=10<br>
jittershrinkrate=1<br>
autokill=yes<br>
delayreject=yes<br>
;iaxthreadcount=30<br>
;iaxmaxthreadcount=150<br>
<br>
<a class="m_561760623631938506moz-txt-link-abbreviated" href="mailto:register=29925:PASSWORD@register.allstarlink.org" target="_blank">register=29925:PASSWORD@register.allstarlink.org</a><br>
<a class="m_561760623631938506moz-txt-link-abbreviated" href="mailto:register=40875:PASSWORD@register.allstarlink.org" target="_blank">register=40875:PASSWORD@register.allstarlink.org</a><br>
<br>
[allstar-autopatch]<br>
type=peer<br>
host=<a href="http://register.allstarlink.org" target="_blank">register.allstarlink.org</a><br>
username=29925<br>
secret=592463<br>
auth=md5<br>
disallow=all<br>
allow=gsm<br>
;allow=ulaw<br>
transfer=no<br>
<br>
<br>
[radio-proxy]<br>
type=user<br>
deny=<a href="http://0.0.0.0/0.0.0.0" target="_blank">0.0.0.0/0.0.0.0</a><br>
permit=/<a href="http://255.255.255.255" target="_blank">255.255.255.255</a><br>
context=radio-secure-proxy<br>
disallow=all<br>
allow=g726aal2<br>
transfer=no<br>
<br>
<br>
[radio-proxy-out]<br>
type=peer<br>
host=<br>
username=42447<br>
secret=800129<br>
auth=md5<br>
disallow=all<br>
allow=g726aal2<br>
transfer=no<br>
<br>
<br>
; Incoming radio connections<br>
<br>
[radio]<br>
type=user<br>
disallow=all<br>
allow=g726aal2<br>
allow=gsm<br>
codecpriority=host<br>
context=radio-secure<br>
transfer=no<br>
<br>
; Incoming phone connections to app_rpt<br>
<br>
;[radio-control]<br>
;type=user<br>
;secret=nunya<br>
;disallow=all<br>
;allow=gsm<br>
;codecpriority=host<br>
;context=radio-control<br>
;transfer=no<br>
<br>
; Setup for outgoing calls<br>
<br>
;[yourprovider] ; This needs to change<br>
;type=peer<br>
;host=127.0.0.1<br>
;secret=nunya<br>
;auth=md5<br>
;disallow=all<br>
;allow=gsm<br>
;transfer=no<br>
<br>
[allstar-sys]<br>
type=user<br>
context=allstar-sys<br>
auth=rsa<br>
inkeys=allstar<br>
disallow=all<br>
allow=gsm<br>
allow=ulaw<br>
<br>
[allstar-public]<br>
type=user<br>
context=allstar-public<br>
auth=md5<br>
secret=allstar<br>
disallow=all<br>
allow=gsm<br>
allow=ulaw<br>
<br>
#includeifexists custom/iax.conf<br>
root@debian:/etc/asterisk#<br>
</font>Here is what rpt.conf file says.</p>
<p><font size="-2">root@debian:/etc/asterisk# cat rpt.conf<br>
; Radio Repeater configuration file (for use with app_rpt)<br>
;<br>
;<br>
; Your Repeater<br>
;<br>
[29925] ; Change this to your
assigned node number<br>
rxchannel = SimpleUSB/usb29925<br>
duplex = 2<br>
erxgain = -3<br>
etxgain = 3<br>
;controlstates=controlstates<br>
scheduler = schedule29925<br>
macro = macro<br>
startup_macro=*95341715<br>
morse = morse29925<br>
macro = macro29925<br>
functions = functions29925<br>
phone_functions = functions29925<br>
link_functions = functions29925<br>
telemetry = telemetry<br>
wait_times = wait-times<br>
context = radio<br>
callerid = "Repeater" <0000000000><br>
idrecording = /etc/asterisk/ids/kc9zhvrpt<br>
idrecording = |iKC9ZHV<br>
accountcode = RADIO<br>
hangtime = 0<br>
althangtime = 10<br>
totime = 210000<br>
idtime = 540000<br>
politeid = 3000<br>
<br>
idtalkover = |iKC9ZHV<br>
unlinkedct = ct88<br>
remotect = ct88<br>
linkunkeyct = ct88<br>
;remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
;remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
;cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
;nolocallinkct=0<br>
;eannmode=1<br>
;connpgm=yourconnectprogram<br>
;discpgm=yourdisconnectprogram<br>
;lnkactenable=0<br>
;lnkacttime=1800<br>
;lnkactmacro=*52<br>
;lnkacttimerwarn=30seconds<br>
;remote_inact_timeout=1800<br>
;remote_timeout=3600<br>
nounkeyct = 0<br>
;holdofftelem=0<br>
beaconing = 0<br>
telemdefault = 2<br>
;archivedir=/etc/asterisk/audio<br>
;<br>
; *** Status Reporting ***<br>
;<br>
; Uncomment the either group following two statpost lines to
report the status of your node to <a href="http://stats.allstarlink.org" target="_blank">stats.allstarlink.org</a><br>
; depending on whether you are running ACID or Limey Linux.<br>
<br>
; ** For ACID ***<br>
statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>
statpost_url=<a class="m_561760623631938506moz-txt-link-freetext" href="http://stats.allstarlink.org/uhandler.php" target="_blank">http://stats.allstarlink.org/uhandler.php</a> ; Status
updates<br>
<br>
; ** For Limey Linux **<br>
;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>
;statpost_url=<a class="m_561760623631938506moz-txt-link-freetext" href="http://stats.allstarlink.org/uhandler.php" target="_blank">http://stats.allstarlink.org/uhandler.php</a> ; Status
updates<br>
<br>
;<br>
; Morse code parameters, these are common to all repeaters.<br>
;<br>
<br>
[morse29925]<br>
<br>
speed=20<br>
frequency=800<br>
amplitude=4096<br>
idfrequency=750<br>
idamplitude=1024<br>
<br>
[schedule29925]<br>
;dtmf_function = m h dom mon dow ; ala cron, star is implied<br>
<br>
<br>
[functions29925]<br>
1=ilink,1<br>
2=ilink,2<br>
3=ilink,3<br>
4=ilink,4<br>
5=macro,1<br>
70=ilink,5<br>
71=ilink,6<br>
72=ilink,7<br>
73=ilink,15<br>
74=ilink,16<br>
75=ilink,8<br>
<br>
951=ilink,11 ; Permanent link disconnect<br>
;952=ilink,12 ; Permanent link receive<br>
953=ilink,13 ; Permanent link transceive<br>
<br>
80=status,1<br>
81=status,2<br>
<br>
;6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ;
Autopatch up<br>
;0=autopatchdn ; Autopatch down<br>
6=autopatchup,context=to-callcentric,noct=1,farenddisconnect=1,dialtime=20000<br>
0=autopatchdn ; Autopatch down<br>
<br>
;989=cop,4<br>
980=status,3<br>
99=cop,6<br>
<br>
; Place command macros here<br>
<br>
[macro29925]<br>
;2= *81<br>
<br>
<br>
<br>
[40875] ; Change this to your
assigned node number<br>
<br>
rxchannel = SimpleUSB/usb40875<br>
duplex = 2<br>
erxgain = -3<br>
etxgain = 3<br>
;controlstates=controlstates<br>
scheduler = schedule40875<br>
macro = macro<br>
startup_macro=*95342448<br>
morse = morse40875<br>
macro = macro40875<br>
functions=functions40875<br>
phone_functions=functions40875<br>
link_functions=functions40875<br>
telemetry=telemetry<br>
wait_times=wait-times<br>
context = radio<br>
callerid = "Repeater" <0000000000><br>
idrecording = /etc/asterisk/ids/kc9zhvrpt<br>
idrecording = |iKC9ZHV/R<br>
accountcode = RADIO<br>
hangtime=10<br>
althangtime=20<br>
totime=210000<br>
idtime=540000<br>
politeid=3000<br>
<br>
idtalkover=|iKC9ZHV/R<br>
unlinkedct=ct89<br>
remotect=ct89<br>
linkunkeyct=ct89<br>
;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE
REMOTE NASA 1<br>
;nolocallinkct=0<br>
;eannmode=1<br>
;connpgm=yourconnectprogram<br>
;discpgm=yourdisconnectprogram<br>
;lnkactenable=0<br>
;lnkacttime=1800<br>
;lnkactmacro=*52<br>
;lnkacttimerwarn=30seconds<br>
;remote_inact_timeout=1800<br>
;remote_timeout=3600<br>
nounkeyct=0<br>
;holdofftelem=0<br>
beaconing=0<br>
telemdefault=2<br>
;archivedir=/etc/asterisk/audio<br>
;<br>
; *** Status Reporting ***<br>
;<br>
; Uncomment the either group following two statpost lines to
report the status of your node to <a href="http://stats.allstarlink.org" target="_blank">stats.allstarlink.org</a><br>
; depending on whether you are running ACID or Limey Linux.<br>
<br>
; ** For ACID ***<br>
statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>
statpost_url=<a class="m_561760623631938506moz-txt-link-freetext" href="http://stats.allstarlink.org/uhandler.php" target="_blank">http://stats.allstarlink.org/uhandler.php</a> ; Status
updates<br>
<br>
; ** For Limey Linux **<br>
;statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null<br>
;statpost_url=<a class="m_561760623631938506moz-txt-link-freetext" href="http://stats.allstarlink.org/uhandler.php" target="_blank">http://stats.allstarlink.org/uhandler.php</a> ; Status
updates<br>
<br>
;<br>
; Morse code parameters, these are common to all repeaters.<br>
;<br>
<br>
[morse40875]<br>
<br>
speed=20<br>
frequency=800<br>
amplitude=4096<br>
idfrequency=750<br>
idamplitude=1024<br>
<br>
[schedule40875]<br>
;dtmf_function = m h dom mon dow ; ala cron, star is implied<br>
<br>
<br>
[functions40875]<br>
1=ilink,1<br>
2=ilink,2<br>
3=ilink,3<br>
4=ilink,4<br>
5=macro,1<br>
70=ilink,5<br>
71=ilink,6<br>
72=ilink,7<br>
73=ilink,15<br>
74=ilink,16<br>
75=ilink,8<br>
<br>
<br>
951=ilink,11 ; Permanent link disconnect<br>
;952=ilink,12 ; Permanent link receive<br>
953=ilink,13 ; Permanent link transceive<br>
<br>
80=status,1<br>
81=status,2<br>
<br>
6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ;
Autopatch up<br>
0=autopatchdn ; Autopatch down<br>
<br>
;989=cop,4<br>
980=status,3<br>
99=cop,6<br>
<br>
; Place command macros here<br>
<br>
[macro40875]<br>
<br>
;[telemetry]<br>
;ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)<br>
;ct2=|t(660,880,150,2048)<br>
;ct3=|t(440,0,150,4096)<br>
;ct4=|t(550,0,150,2048)<br>
;ct5=|t(660,0,150,2048)<br>
;ct6=|t(880,0,150,2048)<br>
;ct7=|t(660,440,150,2048)<br>
;ct8=|t(700,1100,150,2048)<br>
;ct88=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA
1<br>
;NaSA beep<br>
;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA
1<br>
;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE
REMOTE NASA 1<br>
;<br>
; Nextel tones setup<br>
;remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
;remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
;cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
;Unknown settings below..<br>
;unlinkedct=ct1 ; local off-link tone<br>
;remotect=ct3 ; remote base connected tone<br>
;linkunkeyct=ct8 ; remote on-link tone<br>
;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);<br>
;remotemon=|t(1209,0,50,2048)<br>
;cmdmode=|t(900,903,200,2048)<br>
;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
;patchup=rpt/callproceeding<br>
;patchdown=rpt/callterminated<br>
<br>
[telemetry]<br>
ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)<br>
ct2=|t(660,880,150,2048)<br>
ct3=|t(440,0,150,4096)<br>
ct4=|t(550,0,150,2048)<br>
ct5=|t(660,0,150,2048)<br>
ct6=|t(880,0,150,2048)<br>
ct7=|t(660,440,150,2048)<br>
;ct8=|t(700,1100,150,2048)<br>
ct88=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA 1<br>
;NaSA beep<br>
;ct89=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE NASA
1<br>
;remotetx=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;remotemon=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;cmdmode=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE REMOTE
NASA 1<br>
;functcomplete=|t(2175,0,200,2048)(1950,0,175,2048) ; TONE
REMOTE NASA 1<br>
;<br>
; Nextel tones setup<br>
remotetx=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
remotemon=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
cmdmode=|t(1760,0,30,1048)(0,0,30,0)(1760,0,30,2048)(0,0,30,0)(1760,0,30,2048)
; NEXTEL<br>
functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
;Unknown settings below..<br>
;unlinkedct=ct1 ; local off-link tone<br>
;remotect=ct3 ; remote base connected tone<br>
;linkunkeyct=ct8 ; remote on-link tone<br>
;remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);<br>
;remotemon=|t(1209,0,50,2048)<br>
;cmdmode=|t(900,903,200,2048)<br>
;functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)<br>
patchup=rpt/callproceeding<br>
patchdown=rpt/callterminated<br>
<br>
<br>
;<br>
; This section allows wait times for telemetry events to be
adjusted<br>
; A section for wait times can be defined for every repeater<br>
;<br>
<br>
[wait-times]<br>
telemwait=2000<br>
idwait=500<br>
unkeywait=2000<br>
calltermwait=2000<br>
<br>
;<br>
; This is where you define your nodes which cam be connected to.<br>
;<br>
<br>
[nodes]<br>
; Note, if you are using automatic update for allstar link
nodes,<br>
; no allstar link nodes should be defined here. Only place a
definition<br>
; for your locak nodes, and private (off of allstar link) nodes
here.<br>
<br>
29925 = <a class="m_561760623631938506moz-txt-link-abbreviated" href="mailto:radio@127.0.0.1/29925,NONE" target="_blank">radio@127.0.0.1/29925,NONE</a><br>
40875 = <a class="m_561760623631938506moz-txt-link-abbreviated" href="mailto:radio@127.0.0.1/40875,NONE" target="_blank">radio@127.0.0.1/40875,NONE</a><br>
29925 = <a class="m_561760623631938506moz-txt-link-abbreviated" href="mailto:radio@192.168.1.50:4569/29925,NONE" target="_blank">radio@192.168.1.50:4569/29925,NONE</a><br>
40875 = <a class="m_561760623631938506moz-txt-link-abbreviated" href="mailto:radio@192.168.1.50:4569/40875,NONE" target="_blank">radio@192.168.1.50:4569/40875,NONE</a><br>
<br>
<br>
; Memories for remote bases<br>
<br>
[memory]<br>
<br>
;00 = 146.580,100.0,m<br>
;01 = 147.030,103.5,m+t<br>
;02 = 147.240,103.5,m+t<br>
;03 = 147.765,79.7,m-t<br>
;04 = 146.460,100.0,m<br>
;05 = 146.550,100.0,m<br>
<br>
#includeifexists custom/rpt.conf<br>
root@debian:/etc/asterisk#<br>
</font>Above i did try to set at one point in time a static ip and
force it to go back around however didn't work either..</p>
<p><br>
</p>
<p>Anythoughts on this??<font size="-2"><br>
</font></p>
<p><font size="-2">root@debian:/etc/asterisk# cat
/etc/network/interfaces<br>
# This file describes the network interfaces available on your
system<br>
# and how to activate them. For more information, see
interfaces(5).<br>
<br>
source /etc/network/interfaces.d/*<br>
<br>
# The loopback network interface<br>
auto lo<br>
iface lo inet loopback<br>
iface enp1s0 inet loopback<br>
<br>
# The primary network interface<br>
allow-hotplug enp1s0<br>
iface enp1s0 inet dhcp<br>
<br>
root@debian:/etc/asterisk#</font><br>
What did i miss? I even turned firewalls off thinking that might
have been the issue for not allowing the two nodes to connect
together on the same system.<br>
</p>
<p><br>
</p>
<p><br>
</p>
<p><br>
</p>
<p><br>
</p>
</div>
_______________________________________________<br>
App_rpt-users mailing list<br>
<a href="mailto:App_rpt-users@lists.allstarlink.org" target="_blank">App_rpt-users@lists.allstarlink.org</a><br>
<a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
<br>
To unsubscribe from this list please visit <a href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" rel="noreferrer" target="_blank">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"<br>
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.<br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div>Bryan<br>K6CBR<br><a href="mailto:bryan@k6cbr.us" target="_blank">bryan@k6cbr.us</a><br>Allstar Base: 43918, 43991<br>Allstar Hubs: 43919, 47036, 47061(Testing)<br><br></div></div></div></div></blockquote></div>