<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>-rpt.conf</p>
<p>rxchannel = SimpleUSB/usb_29999</p>
<p><br>
</p>
<p>-SimpleUSB.conf ***- your config here is dependent to your
cor/ptt method, this one is with parallel port, and your specific
audio methods.</p>
<p><br>
</p>
<p>[usb_29999]<br>
pp5=ptt<br>
pp10=cor<br>
<br>
eeprom = 0 ; EEPROM installed: 0,1<br>
; 0 = no (default)<br>
; 1 = yes<br>
<br>
hdwtype = 0 ; Leave this set to 0 for USB sound fobs
modified using<br>
; the instructions from usbfob.pdf. Use a
setting of <br>
; 1 is for Dingotel/Sph interfaces.<br>
<br>
duplex = 1 ; Duplex / 0 - half duplex / 1 - full
duplex<br>
<br>
; Receiver parameters<br>
<br>
;carrierfrom=no<br>
;carrierfrom=dsp<br>
;carrierfrom=pp<br>
carrierfrom=ppinvert<br>
;carrierfrom=usb<br>
;carrierfrom=usbinvert<br>
;carrierfrom=vox<br>
<br>
; Tone & CTCSS <br>
<br>
;ctcssfrom=no<br>
ctcssfrom=dsp <br>
;ctcssfrom=usb<br>
;ctcssfrom=rxdemod<br>
<br>
;txctcssdefault=100.0<br>
<br>
;rxctcssfreqs=100.0;67.0,71.9,74.4,77.0,79.7,82.5,85.4,88.5,91.5,94.8,97.4,100.0,103.5,107.2,110.9,114.8,118.8,123.0,127.3,131.8,136.5,141.3,146.2,151.4,156.7,162.2,167.9,173.8,179.9,186.2,192.8,203.5,210.7,218.1,225.7,233.6,241.8,250.3<br>
<br>
;txctcssfreqs=100.0;67.0,71.9,74.4,77.0,79.7,82.5,85.4,88.5,91.5,94.8,97.4,100.0,103.5,107.2,110.9,114.8,118.8,123.0,127.3,131.8,136.5,141.3,146.2,151.4,156.7,162.2,167.9,173.8,179.9,186.2,192.8,203.5,210.7,218.1,225.7,233.6,241.8,250.3<br>
<br>
rxctcssoverride=1<br>
plfilter=yes<br>
<br>
<br>
rxctcssrelax=1 ; reduce talkoff from radios w/o CTCSS Tx HPF<br>
; Do not change this, leave this as a 1<br>
<br>
deemphasis = no ; enable de-emphasis (input from
discriminator)<br>
<br>
rxondelay = 10 ; number of 20ms intervals to hold off
receiver turn-on indication<br>
<br>
rxboost = 0 ; 0 = 20db attenuator inserted, 1= 20db
attenuator removed<br>
; Set to 1 for additonal gain if using a
low-level receiver output<br>
<br>
; Transmitter parameters<br>
<br>
txboost = 0<br>
<br>
txmixa = voice ; Left channel output (A): no,voice<br>
; no - Do not output anything<br>
; voice - output voice only<br>
<br>
txmixb = no ; Right channel output (B): no,voice<br>
; no - Do not output anything<br>
; voice - output voice only<br>
<br>
invertptt = 0 ; Invert PTT: 0,1 ( 0 - ground to
transmit, 1 - open to transmit )<br>
<br>
preemphasis = 0 ; Perform standard 6db/octave
pre-emphasis<br>
<br>
rxdemod=flat<br>
txprelim=yes<br>
txlimonly=no<br>
<br>
; pager = no ; no,a,b (e.g. pager = b means "put the
normal repeat audio on channel A, and the pager audio on channel
B")<br>
<br>
; duplex3 = 0 ; duplex 3 gain setting (0 to disable)<br>
<br>
#includeifexists custom/simpleusb.conf</p>
<p>-----------------------------------------------------------------------------<br>
...mike/kb8jnm</p>
<p><br>
</p>
<p><br>
</p>
<div class="moz-cite-prefix">On 12/22/2018 6:06 PM, ea8ee wrote:<br>
</div>
<blockquote type="cite"
cite="mid:CADJ3RdTPqsSOKrErgXtRJOUhuCdq-6yPyssSu8mUxGtGrGwWtQ@mail.gmail.com">
<meta http-equiv="content-type" content="text/html; charset=UTF-8">
<div dir="auto">I have used my node as a hub for a long time and
now I want to use it as a simple usb with uri which files I
should modify</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a>
<a class="moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
To unsubscribe from this list please visit <a class="moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
</pre>
</blockquote>
</body>
</html>