<html>
  <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
  </head>
  <body bgcolor="#FFFFFF" text="#000000">
    The readme has been included with the image for quite some time.<br>
    <br>
    <div class="moz-cite-prefix">On 8/20/19 6:46 PM, Lu V wrote:<br>
    </div>
    <blockquote type="cite"
      cite="mid:4CCAD1C0-7A74-4A64-A63C-9149BFBFA448@gmail.com">
      <meta http-equiv="content-type" content="text/html; charset=UTF-8">
      Thanks Steve!
      <div>Thats what I suspected. Too bad the original image didn’t
        already have that marked but this is a lesson for myself and
        potentially others going forward.</div>
      <div>Appreciate you getting back to me. <br>
        <br>
        <div dir="ltr">Lu Vencl</div>
        <div dir="ltr">KA4EPS</div>
        <div dir="ltr"><br>
          On Aug 20, 2019, at 6:17 PM, Steve Zingman <<a
            href="mailto:szingman@gmail.com" moz-do-not-send="true">szingman@gmail.com</a>>
          wrote:<br>
          <br>
        </div>
        <blockquote type="cite">
          <div dir="ltr">
            <meta http-equiv="Content-Type" content="text/html;
              charset=UTF-8">
            Once you mark the kernel and headers, you can apt-get update
            and apt-get upgrade to your hearts content. The headers and
            kernel will not change.<br>
            <br>
            Steve N4IRS<br>
            <br>
            <div class="moz-cite-prefix">On 8/20/19 10:38 AM, Lu V
              wrote:<br>
            </div>
            <blockquote type="cite"
cite="mid:CAErwWZ3ZiGqHffkKp3MhB5x88r_f7+1E8r_Yb6UJBioTKQDrOA@mail.gmail.com">
              <meta http-equiv="content-type" content="text/html;
                charset=UTF-8">
              <div dir="ltr">So I might have learned something.  Hear me
                out and tell me if I am on the right track?
                <div>In the readme of the ASL image  it says:</div>
                <div>"There may have been updates to the operating
                  system and AllStarLink since this image was built.</div>
                Run the following commands after the first time you
                boot.<br>
                <br>
                sudo  raspberrypi-kernel-headers raspberrypi-kernel<br>
                sudo apt-get update<br>
                sudo apt-get upgrade -y <br>
                sudo reboot"<br>
                <div><br>
                </div>
                <div>I never did any of these.. Is the "<b>apt-mark
                    hold" </b>a permanent way to prevent the kernel
                  from being upgraded?</div>
                <div>Or is it just temporary?</div>
                <div>And just to make sure, we should always run the
                  update and upgrade going forward? (With the mark hold)</div>
              </div>
              <br>
              <div class="gmail_quote">
                <div dir="ltr" class="gmail_attr">On Tue, Aug 20, 2019
                  at 7:39 AM David McGough <<a
                    href="mailto:kb4fxc@inttek.net"
                    moz-do-not-send="true">kb4fxc@inttek.net</a>>
                  wrote:<br>
                </div>
                <blockquote class="gmail_quote" style="margin:0px 0px
                  0px 0.8ex;border-left:1px solid
                  rgb(204,204,204);padding-left:1ex"><br>
                  Lu,<br>
                  <br>
                  I see from an earlier post that you're running a
                  4.19.66-v7+ kernel <br>
                  version. That's the issue. You must have inadvertently
                  upgraded the kernel <br>
                  when updating Linux.<br>
                  <br>
                  The symptom you're describing (the /dev/dahdi folder
                  completely missing) <br>
                  is explained by missing dahdi drivers.<br>
                  <br>
                  The simplest solution is to down-grade your kernel to
                  the previous <br>
                  version, which should already have drivers present.
                  That kernel and <br>
                  supporting files are still probably installed, just
                  inactive.<br>
                  <br>
                  73, David KB4FXC<br>
                  <br>
                  <br>
                  On Tue, 20 Aug 2019, Lu V wrote:<br>
                  <br>
                  > Interesting discovery. My /dev/dahdi directory is
                  completely missing. <br>
                  I’m beginning to wonder if my sd card is in trouble.
                  <br>
                  I thought I might try to copy that directory from
                  another working image but it won’t let me.  <br>
                  <br>
                  Sent from my iPhone, Lu Vencl<br>
                  <br>
                  > On Aug 19, 2019, at 4:39 PM, David McGough <<a
                    href="mailto:kb4fxc@inttek.net" target="_blank"
                    moz-do-not-send="true">kb4fxc@inttek.net</a>>
                  wrote:<br>
                  > <br>
                  > <br>
                  > Hi Lu,<br>
                  > <br>
                  > I'm not maintaining that code, so I'm not sure
                  where the latest ASL <br>
                  > version is.  I guess it's here:  <a
                    href="https://github.com/AllStarLink/DAHDI"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">https://github.com/AllStarLink/DAHDI</a><br>
                  > <br>
                  > What is the kernel version you're running, at
                  this point?? You can find <br>
                  > this by going to a bash shell prompt and typing:<br>
                  > <br>
                  > cat /proc/version <br>
                  > <br>
                  > 73, David KB4FXC<br>
                  > <br>
                  > <br>
                  > <br>
                  >> On Mon, 19 Aug 2019, Lu V wrote:<br>
                  >> <br>
                  >> Can you offer me some direction as to how I
                  can build dahdi from the sources?<br>
                  >> Thanks<br>
                  >> <br>
                  >> Sent from my iPhone, Lu Vencl<br>
                  >> <br>
                  >>> On Aug 19, 2019, at 12:47 PM, JJC <<a
                    href="mailto:cummingsj@gmail.com" target="_blank"
                    moz-do-not-send="true">cummingsj@gmail.com</a>>
                  wrote:<br>
                  >>> <br>
                  >>> You can also build dahdi from the
                  sources, this is what I do so that I can have the
                  benefit of an updated and more secure and reliable
                  kernel<br>
                  >>> <br>
                  >>> Sent from the iRoad<br>
                  >>> <br>
                  >>>> On Aug 19, 2019, at 10:26, David
                  McGough, KB4FXC <<a href="mailto:kb4fxc@gmail.com"
                    target="_blank" moz-do-not-send="true">kb4fxc@gmail.com</a>>
                  wrote:<br>
                  >>>> <br>
                  >>>> Looks like the dahdi kernel module
                  isn't loading. Did the kernel get updated? If so,
                  revert back to the old kernel or recompile dahdi.<br>
                  >>>> <br>
                  >>>> <br>
                  >>>> 73, David KB4FXC<br>
                  >>>> <br>
                  >>>> <br>
                  >>>>> On Mon, Aug 19, 2019 at 11:40 AM
                  Lu V <<a href="mailto:luvencl8@gmail.com"
                    target="_blank" moz-do-not-send="true">luvencl8@gmail.com</a>>
                  wrote:<br>
                  >>>>> Well this is the first this has
                  happened to me on a pi install.  <br>
                  >>>>> I had replaced a router and
                  needed to restart my node. I used shutdown -r now
                  command and now asterisks will not start.<br>
                  >>>>> I get:<br>
                  >>>>> Unable to connect to remote
                  asterisk (does /var/run/asterisk.ctl exist?)<br>
                  >>>>> root@repeater:/home/repeater#<br>
                  >>>>> <br>
                  >>>>> So if I execute with asterisk
                  -vvvvvvc I get this output. See attached file.<br>
                  >>>>> Can someone advise what might be
                  happening before I give up and reimage this node?<br>
                  >>>>> Thanks.<br>
                  >>>>> Lu<br>
                  >>>>> KA4EPS<br>
                  >>>>>
                  _______________________________________________<br>
                  >>>>> App_rpt-users mailing list<br>
                  >>>>> <a
                    href="mailto:App_rpt-users@lists.allstarlink.org"
                    target="_blank" moz-do-not-send="true">App_rpt-users@lists.allstarlink.org</a><br>
                  >>>>> <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
                  >>>>> <br>
                  >>>>> To unsubscribe from this list
                  please visit <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
                  and scroll down to the bottom of the page. Enter your
                  email address and press the "Unsubscribe or edit
                  options button"<br>
                  >>>>> You do not need a password to
                  unsubscribe, you can do it via email confirmation. If
                  you have trouble unsubscribing, please send a message
                  to the list detailing the problem. <br>
                  >>>>
                  _______________________________________________<br>
                  >>>> App_rpt-users mailing list<br>
                  >>>> <a
                    href="mailto:App_rpt-users@lists.allstarlink.org"
                    target="_blank" moz-do-not-send="true">App_rpt-users@lists.allstarlink.org</a><br>
                  >>>> <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
                  >>>> <br>
                  >>>> To unsubscribe from this list please
                  visit <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
                  and scroll down to the bottom of the page. Enter your
                  email address and press the "Unsubscribe or edit
                  options button"<br>
                  >>>> You do not need a password to
                  unsubscribe, you can do it via email confirmation. If
                  you have trouble unsubscribing, please send a message
                  to the list detailing the problem. <br>
                  >>>
                  _______________________________________________<br>
                  >>> App_rpt-users mailing list<br>
                  >>> <a
                    href="mailto:App_rpt-users@lists.allstarlink.org"
                    target="_blank" moz-do-not-send="true">App_rpt-users@lists.allstarlink.org</a><br>
                  >>> <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
                  >>> <br>
                  >>> To unsubscribe from this list please
                  visit <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
                  and scroll down to the bottom of the page. Enter your
                  email address and press the "Unsubscribe or edit
                  options button"<br>
                  >>> You do not need a password to
                  unsubscribe, you can do it via email confirmation. If
                  you have trouble unsubscribing, please send a message
                  to the list detailing the problem. <br>
                  >> <br>
                  > <br>
                  > _______________________________________________<br>
                  > App_rpt-users mailing list<br>
                  > <a
                    href="mailto:App_rpt-users@lists.allstarlink.org"
                    target="_blank" moz-do-not-send="true">App_rpt-users@lists.allstarlink.org</a><br>
                  > <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
                  > <br>
                  > To unsubscribe from this list please visit <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
                  and scroll down to the bottom of the page. Enter your
                  email address and press the "Unsubscribe or edit
                  options button"<br>
                  > You do not need a password to unsubscribe, you
                  can do it via email confirmation. If you have trouble
                  unsubscribing, please send a message to the list
                  detailing the problem. <br>
                  _______________________________________________<br>
                  App_rpt-users mailing list<br>
                  <a href="mailto:App_rpt-users@lists.allstarlink.org"
                    target="_blank" moz-do-not-send="true">App_rpt-users@lists.allstarlink.org</a><br>
                  <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
                  <br>
                  To unsubscribe from this list please visit <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
                  and scroll down to the bottom of the page. Enter your
                  email address and press the "Unsubscribe or edit
                  options button"<br>
                  You do not need a password to unsubscribe, you can do
                  it via email confirmation. If you have trouble
                  unsubscribing, please send a message to the list
                  detailing the problem. <br>
                  <br>
                  _______________________________________________<br>
                  App_rpt-users mailing list<br>
                  <a href="mailto:App_rpt-users@lists.allstarlink.org"
                    target="_blank" moz-do-not-send="true">App_rpt-users@lists.allstarlink.org</a><br>
                  <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a><br>
                  <br>
                  To unsubscribe from this list please visit <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                    rel="noreferrer" target="_blank"
                    moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
                  and scroll down to the bottom of the page. Enter your
                  email address and press the "Unsubscribe or edit
                  options button"<br>
                  You do not need a password to unsubscribe, you can do
                  it via email confirmation. If you have trouble
                  unsubscribing, please send a message to the list
                  detailing the problem. <br>
                </blockquote>
              </div>
              <br>
              <fieldset class="mimeAttachmentHeader"></fieldset>
              <pre class="moz-quote-pre" wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@lists.allstarlink.org" moz-do-not-send="true">App_rpt-users@lists.allstarlink.org</a>
<a class="moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>

To unsubscribe from this list please visit <a class="moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users" moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
</pre>
            </blockquote>
            <br>
          </div>
        </blockquote>
        <blockquote type="cite">
          <div dir="ltr"><span>_______________________________________________</span><br>
            <span>App_rpt-users mailing list</span><br>
            <span><a href="mailto:App_rpt-users@lists.allstarlink.org"
                moz-do-not-send="true">App_rpt-users@lists.allstarlink.org</a></span><br>
            <span><a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a></span><br>
            <span></span><br>
            <span>To unsubscribe from this list please visit <a
href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users"
                moz-do-not-send="true">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>
              and scroll down to the bottom of the page. Enter your
              email address and press the "Unsubscribe or edit options
              button"</span><br>
            <span>You do not need a password to unsubscribe, you can do
              it via email confirmation. If you have trouble
              unsubscribing, please send a message to the list detailing
              the problem. </span><br>
          </div>
        </blockquote>
      </div>
      <br>
      <fieldset class="mimeAttachmentHeader"></fieldset>
      <pre class="moz-quote-pre" wrap="">_______________________________________________
App_rpt-users mailing list
<a class="moz-txt-link-abbreviated" href="mailto:App_rpt-users@lists.allstarlink.org">App_rpt-users@lists.allstarlink.org</a>
<a class="moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a>

To unsubscribe from this list please visit <a class="moz-txt-link-freetext" href="http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users">http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users</a> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
</pre>
    </blockquote>
    <br>
  </body>
</html>