[FSG-public] Ham WAN - Client up and running

[Luis V. Romero]

Hi guys:

I got the "demo" DynaDish5 client from W9CR, but his password didn't work,
so I reset the device to default.  Figure I may as well learn to configure
this thing on my own. However, I think I need some help. :-)

I have placed it at around 10 feet off the ground for testing.  In WinBox, I
see lots of neighborhood AP's on 5Gigs, especially my own.  My noise floor
is -104 to -106 depending on frequency.  My own 5G AP is the "loudest" at a
SNR of 45.  Moths other neighborhood devices read around 25-35

I have yet to log any signals on 5.9G - I see many A, P and AP MAC's on
5.180 through 5.805, but nothing above that.  Several MAC's have no SSID -
not uncommon.  Lots of BHN 5G hits plus the Peace Brazilian Baptist Church
network which seems quite busy in the snooper :-)

I note that there is a configuration text file on the website.  Should I
assume that this is a script?  I have changed the notation for my station
name - W4LT-1 - But, again, I reset the system to factory default.

I attempted to run this "script" in terminal and execute it.  Is this how I
"load" this configuration?  It uploaded into the device, but I don't know if
I executed it or not.

Some help in configuration would be appreciated so I can then move this
thing to the roof and see if I can get on either Tampa or St Pete. I may
have a tree blocking Tampa, but my shot to St Pete is much clearer. but much
farther away.

-lu - W4LT -



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/fsg-public/attachments/20170307/df48aa64/attachment.html>