[P25nx] MMDVM reflector bridging

[Bryan Fields]

Juan Carlos, XE1F has some code running to bridge p25nx to MMDVM reflectors.
It's in test, and it's not on the "public" reflectors.

If you have a MMDVM setup and want to try it, you'll need to configure it for
these reflectors.  Give it a test and see how it works!

Instructions below:


Setting P25 reflectors on MMDVM, Pi Star, etc:


# You will need to few lines at the end of the following files:
# So point your browser to:
pi-star/admin/expert/ssh_access.php

# File 1
rpi-rw
sudo nano /usr/local/etc/P25HostsLocal.txt

# Add at the end of the file (use Tabs, no spaces):
#TG        IP or Domain      Port
10101   44.98.254.131   41000
10102   44.98.254.131   41001
10103   44.98.254.131   41002
10202   44.98.254.131   41003
10203   44.98.254.131   41004
10302   44.98.254.131   41005
10303   44.98.254.131   41006

# Ctrl + o to save file
# Ctrl + x to close the editor

# File 2
sudo su
cd /root
rpi-rw
nano P25Hosts.txt

# Again add at the end of the file (use Tabs, no spaces):
#TG        IP or Domain      Port
10101   44.98.254.131   41000
10102   44.98.254.131   41001
10103   44.98.254.131   41002
10202   44.98.254.131   41003
10203   44.98.254.131   41004
10302   44.98.254.131   41005
10303   44.98.254.131   41006

# Ctrl + o to save file
# Ctrl + x to close the editor

# Apply changes
# Now on your browser displaying your Pi-Star controls, cilck on
'Configuration' and then click on 'Update' so the changes will be applied.

-- 
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net