Steve, that appeared to fix it, I got a few things to tweak but it looks close, Im about to head out and will have to get back at it later.

root@repeater:/etc# ./rc.local
DMRLink Gateway
Setting [GENERAL] outputAudioDevice -> /dev/null
Setting [GENERAL] inputAudioDevice -> /dev/null
Setting [GENERAL] decoderFallBack -> false
Setting [GENERAL] useMicrophone -> false
Setting [GENERAL] useVox -> true
Setting [GENERAL] voxDecay -> 2
Setting [GENERAL] voxTrigger -> 200
Setting [AMBE_AUDIO] server -> 127.0.0.1
Setting [AMBE_AUDIO] fromDMRPort -> 31000
Setting [AMBE_AUDIO] toDMRPort -> 31003
Setting [USRP] server -> 127.0.0.1
Setting [USRP] toASLPort -> 32001
Setting [USRP] fromASLPort -> 34001
Setting [USRP] aslAudio -> AUDIO_USE_AGC
Setting [USRP] agcGain -> -20
Setting [USRP] dmrAudio -> AUDIO_USE_BPF
Setting [USRP] dmrGain -> 0.35
Setting [DV3000] server -> 127.0.0.1
Setting [DV3000] port -> 2460
ioctl reset error
ioctl speed error
ioctl stereo error
ioctl setfmt error
Audio In/Out Device: /dev/null
Open UDP listener on 127.0.0.1:31000
Open USRP on 127.0.0.1:32001
Begin DV3000 decode
Using hardware AMBE decoder
Starting DMRLink --> USRP thread
Open UDP listener on 127.0.0.1:34001
Starting USRP --> DMRLink thread
root@repeater:/etc# Subscriber file has been updated. 24491 IDs imported
Subscriber file has been updated. 24491 IDs imported
INFO DMRlink 'ambe_audio.py' (c) 2015 N0MJS & the K0USY Group - SYSTEM STARTING...
INFO (AMBE_PEER) IPSC Instance Created: 12345, 192.168.0.203:52345
INFO section = AMBE_PEER
ERROR Section AMBE_PEER was not found, using DEFAULTS
INFO debug = False
INFO outToFile = False
INFO outToUDP = True
INFO gateway = 127.0.0.1
INFO toGatewayPort = 31000
INFO remoteControlPort = 31002
INFO fromGatewayPort = 31003
INFO gatewayDmrId = 0
INFO tgFilter = 9
INFO txTg = 9
INFO txTs = 2
INFO DMRLink ambe server
Error: gatewayDmrId must be set (greater than zero)


On Sun, Feb 28, 2016 at 3:57 PM, Steve Zingman <szingman@msgstor.com> wrote:
Overwrite all copies of dmrlink.py in /opt/dmrlink/ and below with the new dmrlink.py in /srv/DMRlink 

On 02/28/2016 01:42 PM, Robert Newberry wrote:
Its OK Steve, appreciate your efforts as always. I'll work around your schedule. I will be around all day, and leaving in the evening for dinner at my parents Usually home be 7pm.

On Sun, Feb 28, 2016 at 1:40 PM, Steve Zingman <szingman@msgstor.com> wrote:
I'll have to troubleshoot when I get home

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 1:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:

I have, peer, subscriber, talkgroup

On Sun, Feb 28, 2016 at 1:24 PM, Steve Zingman <szingman@msgstor.com> wrote:
And you have all the csv files in /opt/dmrlink?

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 1:22 PM, Robert Newberry <N1XBM@amsat.org> wrote:

root@repeater:/opt/dmrlink/ambe_audio# ls -l subscriber_ids.csv
-rw-r--r-- 1 root root 1630189 Feb 28 13:07 subscriber_ids.csv
root@repeater:/opt/dmrlink/ambe_audio# ls -l talkgroup_ids.csv
-rw-r--r-- 1 root root 256 Feb 28 13:07 talkgroup_ids.csv

So the owner has read and write, and everyone else just write.

On Sun, Feb 28, 2016 at 1:15 PM, Steve Zingman <szingman@msgstor.com> wrote:
What are the permissions on the file?

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 1:14 PM, Robert Newberry <N1XBM@amsat.org> wrote:

Well I tried as you suggested I am still getting the same error. Would a file permission be causing this issue?

File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
    from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers
ImportError: cannot import name get_subscriber_info


On Sun, Feb 28, 2016 at 1:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Try to copy it to /opt/dmrlink/ambe_audio

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 12:59 PM, Robert Newberry <N1XBM@amsat.org> wrote:

I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.


On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:
Check for subscriber_ids.csv in /opt/darling

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:

OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap

root@repeater:~# netstat -unap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
udp        0      0 0.0.0.0:34001           0.0.0.0:*                           279/DMRGateway 
udp        0      0 127.0.0.1:32001         0.0.0.0:*                           277/asterisk   
udp        0      0 0.0.0.0:31000           0.0.0.0:*                           279/DMRGateway 
udp        0      0 0.0.0.0:50001           0.0.0.0:*                           234/python     
udp        0      0 0.0.0.0:2460            0.0.0.0:*                           221/AMBEserverGPIO
udp        0      0 0.0.0.0:4569            0.0.0.0:*                           277/asterisk   
udp        0      0 0.0.0.0:52307           0.0.0.0:*                           234/python     
udp        0      0 0.0.0.0:53900           0.0.0.0:*                           234/python     
udp        0      0 0.0.0.0:49823           0.0.0.0:*                           279/DMRGateway

ambe_audio.py will not run I still get this error.

File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
    from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers
ImportError: cannot import name get_subscriber_info

I must be missing a file? by my own screwing up of coarse! 


On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:
netstat-unap

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:

So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.

root@repeater:/etc# Traceback (most recent call last):
  File "/opt/dmrlink/bridge/bridge.py", line 273, in <module>
    reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP'])
  File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP
    p.startListening()
  File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening
    self._bindSocket()
  File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket
    raise error.CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use.
Traceback (most recent call last):
  File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
    from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers
ImportError: cannot import name get_subscriber_info


So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.

The second issuse about can not import subscriber_info, I am not sure where to look for that.

On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:
I checked the notes. Above the move of the ini is a cd DMRGateway

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:

So I'm following the instructions from a previous email.

I executed the cp command from /srv

cp DMRGateway.armv7 DMRGateway

I get no such file or directory. I can however see DMRGateway.armv7 in
/srv/DMRGateway

Am I just in the wrong directory?

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
   

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital




_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital