Matthew,

My XPR8300 does not have any telephone port (RJ11)  for this option.  In addition, I see that even for other models (XPR8XXX) you need the CONNECT PLUS XRI 9100 INTERCONNECT GATEWAY to perform this function.

What am I missing?

Mike

On Fri, Nov 6, 2015 at 8:35 PM, Matthew Pitts <daywalker_blade_2004@yahoo.com> wrote:

Steve,

I'm not certain about the Hytera repeaters, but Motorola MotoTRBO repeaters require purchase of a code to be entered in the CPS to enable telephone interconnection, which is sort of what we would be doing. I also know that a ham in Europe was experimenting with connecting a Hytera repeater to Asterisk via the Hytera telephone interconnection port.

Matthew Pitts
N8OHU

On November 6, 2015 1:30:42 PM EST, Steve Zingman <szingman@msgstor.com> wrote:
>Matthew,
>Can you expand on 2?
>
>Steve
>
>On 11/6/2015 7:45 AM, Matthew Pitts wrote:
>> All right guys,
>>
>> Here are some of my thoughts on this:
>>
>> 1) We will need the DV3000 to get D-STAR AMBE into the system.
>>
>> 2) We should be able to get DMR audio into it without needing an
>external AMBE chip; however, it may require an addition to the repeater
>programming software that isn't standard to activate the capabilities.
>>
>> 3) Wires-X is an unknown at this point, though I suspect we can
>accommodate it somehow.
>>
>> Matthew Pitts
>> N8OHU
>
>_______________________________________________
>Allstar-Digital mailing list
>Allstar-Digital@lists.keekles.org
>http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

--
Sent from my Moto X with K-9 Mail. Please excuse my brevity.

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic