On Fri, May 13, 2016 at 9:20 AM, Steve Zingman <szingman@msgstor.com> wrote:

Post /var/log/dmrlink/ambe_audio.log after you issue the section command

On 5/13/2016 9:12 AM, Robert Newberry wrote:
So I had a look at things. All files refernced are in /opt/dmrlink/ambe_audio

So in dmrlink.cfg I have
[AMBE_PEER]
ENABLED: True
RADIO_ID: 312107
IP: 192.168.0.203
PORT: 52345
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: False
XNL_MASTER: False
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: False
AUTH_ENABLED: True
AUTH_KEY: A1B2C3
MASTER_IP: 192.168.0.203
MASTER_PORT: 50001

I have in ambe_audio.cfg
# DEFAULTS - General settings. These values are
#inherited in each subsequent section (defined by section value).
[DEFAULTS]
debug = False                                   # Debug output for each VOICE frame
outToFile = False                               # Write each AMBE frame to a file called ambe.bin
outToUDP = True                               # Send each AMBE frame to the _sock object (turn on/off DMRGateway operation)
gateway = 127.0.0.1                           # IP address of DMRGateway app
toGatewayPort = 31000                      # Port DMRGateway is listening on for AMBE frames to decode
remoteControlPort = 31002                  # Port that ambe_audio is listening on for remote control commands
fromGatewayPort = 31003                   # Port to listen on for AMBE frames to transmit to all peers
gatewayDmrId = 312307                      # id to use when transmitting from the gateway
tgFilter = 42657                                   # A list of TG IDs to monitor. All TGs will be passed to DMRGateway
txTg = 42657                                      # TG to use for all frames received from DMRGateway -> IPSC
txTs = 2                                       # Slot to use for frames received from DMRGateway -> IPSC
#
# The section setting defines the current section to use. By default, the ‘ENABLED’ section in dmrlink.cfg is used.
# Any values in the named section override the values from the DEFAULTS section. For example, if the BM section
# has a value for gatewayDmrId it would override the value above. Only one section should be set here. Think
# of this as an easy way to switch between several different configurations with a single line.
#
#section = BM                                   # Use BM section values
#section = Sandbox                              # Use SANDBOX section values

[AMBE_PEER]
gatewayDmrId = 312307
tgFilter = 42657
txTg = 42657
txTs = 2

[ME_SW]                                         # BrandMeister
tgFilter = 3123                                  # A list of TG IDs to monitor. All TGs will be passed to DMRGateway
txTg = 3123                                     # TG to use for all frames received from DMRGateway -> IPSC
txTs = 2                                          # Slot to use for frames received from DMRGateway -> IPSC

So AMBE_PEER works fine, I attempted to add ME_SW which only works one way. The way I tested this is by using my dv4mini on 3123 attempting to talk to my repeater. Audio passed from my dv4mini to my repeater, but my repeater (from ASL) will not pass audio to the dv4mini. Also my bridge is setup for 3123 and my local users on the repeater can use 3123 for QSOs.

I'm guessing part of my problem is I need to add ME_SW to dmrlink.cfg. Although I'm confused about some of the settings such as using duplicate information, such as ports and IDs.

Thanks

_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
www.radioguysrepeaternetwork.com