Steve,I'm not sure it will help, but I made a picture in PDF and e-mailed it direct to you.
On Wed, Apr 5, 2017 at 3:30 PM, Steve Zingman <szingman@msgstor.com> wrote:--
OK, So,______________________________
2 Masters, 1 Peer.
Peer connected to BM?
Repeater1 connected to Master1?
Repeater2 connected to Master2?
"2 masters then each repeater is peered to one master." ????
On 4/5/2017 3:24 PM, Robert Newberry wrote:
-No Actually 2 masters then each repeater is peered to one master. I had to do this because of NAT hairpining. I then have the Masters talking to each others to have both repeaters "linked"
-Yes I am Peered to BM.
- Yes my repeaters each have their own Masters withing DMRlink.
-No AMBE_AUDIO is peered directly to BM.
On Wed, Apr 5, 2017 at 3:13 PM, Steve Zingman <szingman@msgstor.com> wrote:--
I know you are running a bridge. Can I assume 1 Master and 1 Peer?______________________________
The Peer is connected to BM?
Your Repeaters connect to the Master?
The dmrlink / ambe_audio is connected to the Master?
On 4/5/2017 2:18 PM, Robert Newberry wrote:
Does anyone have any suggestions on how I should start troubleshooting this?I hope that I formulated my question in a way that makes sense. I am unsure how to trouble shoot this because it appears that DMRGateway works in both directions...sort of.This never used to work this way, If I TX'd on my DMR repeater it was heard on Allstar, and in the opposite if I TX'd on Allstar it would be heard on my DMR repeater locally.-When I TX on my local DMR repeater it is heard on BM by my test subject on an open spot, but the audio is not being heard on AllstarI've encountered a strange problem on my existing system that has been working for over a year without problem. I have not recently updated the software nor have I made any changes. The day I noticed it stopped working correctly I probably haven't even logged into it for weeks. I did all of the simple stuff like rebooting/ removing power to repeaters, routers, RPI's still hasn't fixed the problem.Here is the problem.
-When I TX on Allstar it goes up to BM and is heard by my test subject on his open spot, but the audio does not repeat on my local DMR repeater.
-When my test subject TX's on his open spot I hear it on Allstar and DMR.
--
N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
www.radioguysrepeaternetwork.com
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles. org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-di gital _________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles. org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-di gital N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles. org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar- digital _________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles. org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar- digital N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital