Michael,Sorry for the lack of comments in the file (it was taken from my Allstar node).You should find this diagram useful: https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.pdfambe_audio.cfg:_gateway ; IP address of DMRGateway application_gateway_port ; UDP port of DMRGateway listener_remote_control_port ; UDP command port (will be used to adjust ambe_audio.py parameters from ASL)DMRGateway.ini:[AMBE_AUDIO]server and port ; UDP address of ambe_audio.py[USRP]server and port ; UDP address of USRP (asterisk server address)rpt.conf :
rxchannel = usrp/XX.XX.XX.XX:YYYY:ZZZZ
Where XX.XX.XX.XX is the UDP address of DMRGateway application
YYYY is the transmit port (USRP ---->>>> DMRGateway)
ZZZZ is the receive port (DMRGateway ------->>>> USRP)
Hope this helpsMikeOn Sat, Dec 12, 2015 at 12:08 AM, Michael Hebert <mhebert1975@gmail.com> wrote:Mike,In your rxchannel stanza, is 192.168.1.182:34001:32001 the IP address of your RPi? is 34001 and 32001 the tx and rx ports going to the DV3000 dongle?Also, I notice when I run help in asterisk, usrp show is there.Here is what mine shows.192.168.1.182:34001 txkey no rxkey 0 read 0 write 0Waiting on DV3000 to show up.Last, in the rpt.conf is that the minimum or the only statements you need?Michael KD5DFBOn Fri, Dec 11, 2015 at 12:03 PM, Mike Zingman <mike.zingman@gmail.com> wrote:1) in /etc/asterisk/modules.conf enable usrp asload => chan_usrp.so
2) in rpt.conf create a stanza like:
[1999]
rxchannel = usrp/192.168.1.182:34001:32001
duplex = 2
scheduler=scheduler
functions = functions-repeater
hangtime=0
authlevel = 0
Where the address and ports are configured to your network.
3) in rpt.conf add your node
[nodes]
1999 = radio@127.0.0.1:4570/1999,NONE
Now chan_usrp is ready to go.
On Fri, Dec 11, 2015 at 12:56 PM, David KE6UPI <dshaw@ke6upi.com> wrote:Hello Robert, If you find out how to configure the Chan_USRP and asterisk please let me know.DavidOn Fri, Dec 11, 2015 at 9:28 AM, Robert Newberry <N1XBM@amsat.org> wrote:_______________________________________________Is the "readme.md" the documentation I should be reading for setting up DMRlink?
I've also been scanning dmrlink_SAMPLE.cfg for how to setup a parrot tg.
Thank you
N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital