No Luck, 

I'm not using a DMR repeater. (I don't have one.) 

My setup.

RPi Dial Node 2084 --> USRP --> DMRLink peered to N4IRS. 

Should this work? I'm starting /opt/dmrlink/gateway/dmrlink.py . Should I be starting it under the bridge dir?

Thanks, David

On Tue, Dec 15, 2015 at 6:26 AM, Steve Zingman <szingman@msgstor.com> wrote:

Point a peer at the test master, either a repeater or DMRlink. If it's DMRlink, send the log to the console and set the log level to DEBUG. listen to the repeater or watch the screen. You will see the traffic.

On 12/15/2015 9:08 AM, Robert Newberry wrote:

OK I'll just drop it for now. I feel like I said that and reading your reply I still feel the same way. Anyways I'll just save on bandwidth and worry about when I need to cross that bridge.

Thanks

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
   

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital