I got an XPR8300 that I'm going to put on dummy loads. I want to start testing with this. So other than the DV3000 that plugs into the RPI2. Is there anything else I need to start experimenting with DMRlink and DMRgateway?

I have working analog nodes on allstar. I also have access to a XPR8400 that I can borrow too.

I think as the project exist it's RX only, eventually it will work both ways right?

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086