I am able to open in nano /opt/dmrlink/subscriber_ids.csv everything looks ok, I see a bunch of IDs and names. I noticed that its not executable.

On Sun, Feb 28, 2016 at 12:53 PM, Steve Zingman <szingman@msgstor.com> wrote:

Check for subscriber_ids.csv in /opt/darling

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 12:48 PM, Robert Newberry <N1XBM@amsat.org> wrote:

OK resolved one issue with 0.0.0.0:52307 I ran rc.local twice and had a couple of instances. I went thru and killed duplicate processes and that errror cleared up here is the results of netstat -unap

root@repeater:~# netstat -unap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
udp        0      0 0.0.0.0:34001           0.0.0.0:*                           279/DMRGateway 
udp        0      0 127.0.0.1:32001         0.0.0.0:*                           277/asterisk   
udp        0      0 0.0.0.0:31000           0.0.0.0:*                           279/DMRGateway 
udp        0      0 0.0.0.0:50001           0.0.0.0:*                           234/python     
udp        0      0 0.0.0.0:2460            0.0.0.0:*                           221/AMBEserverGPIO
udp        0      0 0.0.0.0:4569            0.0.0.0:*                           277/asterisk   
udp        0      0 0.0.0.0:52307           0.0.0.0:*                           234/python     
udp        0      0 0.0.0.0:53900           0.0.0.0:*                           234/python     
udp        0      0 0.0.0.0:49823           0.0.0.0:*                           279/DMRGateway

ambe_audio.py will not run I still get this error.

File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
    from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers
ImportError: cannot import name get_subscriber_info

I must be missing a file? by my own screwing up of coarse! 

On Sun, Feb 28, 2016 at 12:41 PM, Steve Zingman <szingman@msgstor.com> wrote:

netstat-unap

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 12:38 PM, Robert Newberry <N1XBM@amsat.org> wrote:

So I noticed that ambe_audio.py and bridge.py were not comming up at bootup. I ran ./rc.local and saw it was permission denied. I corrected that. This is what I get.

root@repeater:/etc# Traceback (most recent call last):
  File "/opt/dmrlink/bridge/bridge.py", line 273, in <module>
    reactor.listenUDP(NETWORK[ipsc_network]['LOCAL']['PORT'], networks[ipsc_network], interface=NETWORK[ipsc_network]['LOCAL']['IP'])
  File "/usr/lib/python2.7/dist-packages/twisted/internet/posixbase.py", line 374, in listenUDP
    p.startListening()
  File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 175, in startListening
    self._bindSocket()
  File "/usr/lib/python2.7/dist-packages/twisted/internet/udp.py", line 195, in _bindSocket
    raise error.CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on 0.0.0.0:52307: [Errno 98] Address already in use.
Traceback (most recent call last):
  File "/opt/dmrlink/ambe_audio/ambe_audio.py", line 19, in <module>
    from dmrlink import IPSC, NETWORK, networks, logger, int_id, hex_str_3, hex_str_4, get_info, talkgroup_ids, peer_ids, PATH, get_subscriber_info, reread_subscribers
ImportError: cannot import name get_subscriber_info

So I think the first problem where it says it cant listen on 0.0.0.0:52307 that has to do with my peer connection to brandmiester. I've looked at dmrlink.cfg in both ambe_audio and bridge directories. I can not see where that port is duplicated.

The second issuse about can not import subscriber_info, I am not sure where to look for that.

On Sun, Feb 28, 2016 at 10:57 AM, Steve Zingman <szingman@msgstor.com> wrote:

I checked the notes. Above the move of the ini is a cd DMRGateway

Sent via smoke signal (AT&T 4G LTE)

On Feb 28, 2016, at 10:49 AM, Robert Newberry <N1XBM@amsat.org> wrote:

So I'm following the instructions from a previous email.

I executed the cp command from /srv

cp DMRGateway.armv7 DMRGateway

I get no such file or directory. I can however see DMRGateway.armv7 in
/srv/DMRGateway

Am I just in the wrong directory?

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
   

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital