Michael, What helped me was. I have a DVMega as well. I used my DMR ID 110618 for the TG. Program one radio with the TG for the DVMega and the second radio same TG for your repeater. Transmit on the DVMega and tune the TX side of your repeater. The DVMega will go through BM then back to your repeater and key to the second radio. Slow turns.DavidOn Sat, May 27, 2017 at 3:47 PM, Michael Hebert <mhebert1975@gmail.com> wrote:David,I have the new INADVM REV2 made by Kevin Custer W3KKC. I have tried to tune it several times using this website.Thanks for the links! I am going to read thru them a give it a try.Michael KD5DFBOn Sat, May 27, 2017 at 11:25 AM, David KE6UPI <dshaw@ke6upi.com> wrote:Hello Michael, Have you tuned the ZUM board?Most users tune the Tx first then Rx.As for the VXR-7000 I can't speak if it will work or not..DavidKE6UPIOn Fri, May 26, 2017 at 10:29 PM, Michael Hebert <mhebert1975@gmail.com> wrote:Group,I know this might be a little off subject. I have tried the MMDVM Yahoo group with no luck.Has anyone interface a Vertex VXR-7000 repeater to a MMDVM setup. I can't get DMR to work. The portable radio will key up 3 times then emit the long tone like the repeater is not there.Any help would be greatly appreciated!Michael KD5DFB
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-di gital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-di gital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-di gital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar- digital