The USRP channel driver was created for for the OP25 project. A open source P25 project.
It listens on a UDP port for decoded audio and passes it to asterisk and vise versa. We used the USRP channel driver to listen to a DMR repeater and send the audio to AllStar.
It was a heck of a lot easier then writing a new channel or hacking up a existing one. I think we should use it for other digital modes.
I'm thinking about digging out the Pi and putting it back online.

73, Steve N4IRS

On 10/30/2015 10:04 PM, Robert Newberry wrote:

I really want to get one of these to start playing. I'm not sure how to feed this into a DV3000 I had to google USRP just to decode what was said.

I have a feeling it won't be long before p25, dstar, dmr, and analog will all be able to talk together on allstar!

I already have dmr radios. The DV4MINI is at a very low price point too!

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic