I've confirmed my repeater is a peer and I've pointed it to my RPI2.

[PLAYBACK_PEER]
ENABLED: True
RADIO_ID: 12345  <---Is it OK to leave this as it is?
IP: 0.0.0.0  <----- Should I change this to the IP of the repeater?
PORT: 50002 <-----Same here change this to port the repeater resides on?
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: False
XNL_MASTER: False
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: False
AUTH_ENABLED: True
AUTH_KEY: A1B2C3
MASTER_IP: 192.168.0.203 <---this is the IP of the RPI, I assume this stays the same?
MASTER_PORT: 50001

On Sat, Dec 26, 2015 at 4:40 PM, Steve Zingman <szingman@msgstor.com> wrote:
The dmrlink.cfg in playback is only for playback. Disable or remove N1XBM_MASTER
Make sure it connects to the master as a peer



On 12/26/2015 04:33 PM, Robert Newberry wrote:
So long e-mail here with questions.

I should be working in /opt/dmrlink/playback
The files I need to be concerned with are dmrlink.cfg and playback_config.py
Now to get echo going do I just run playback.py?

So I setup up playback_config.py with TG 9998 time slot 0...well one, but I think you know what I mean.
I programed my radio the same way. I also programmed the repeater, That end of it seems to be OK.

Now dmrlink.cfg is where I am confused. So I've pointed my repeater to 192.168.0.203 port 50002 which is the IP of my RPI2. I've confirmed my auth key is correct. Got any suggestions where I am hosed?

[PLAYBACK_PEER]
ENABLED: True
RADIO_ID: 12345
IP: 0.0.0.0
PORT: 50002
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: False
XNL_MASTER: False
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: False
AUTH_ENABLED: True
AUTH_KEY: A1B2C3
MASTER_IP: 192.168.0.203
MASTER_PORT: 50001

[N1XBM_MASTER]
ENABLED: True
RADIO_ID: 54321
IP: 0.0.0.0
PORT: 50001
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: False
XNL_MASTER: False
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: True
AUTH_ENABLED: True
AUTH_KEY: A1B2C3
# Below not used for a Master
# MASTER_IP: 1.2.3.4
# MASTER_PORT: 50000


On Fri, Dec 25, 2015 at 1:14 PM, Steve Zingman <szingman@msgstor.com> wrote:
It sends to the same TS and TG defined in payback config


On 12/25/2015 01:13 PM, Robert Newberry wrote:

Sorry I hit send a little to early.

I would assume there has to be a place somewhere that would indicate where to send that back to.

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
   

On Dec 25, 2015 1:11 PM, "Robert Newberry" <N1XBM@amsat.org> wrote:

So in dmrlink.cfg I have my RPI2 as a master. I've pointed my repeater at my RPI2. That all seems fine, where I'm confused is how does the software know how or where to echo the audio back to?

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
   

On Dec 24, 2015 6:28 PM, "Steve Zingman" <szingman@msgstor.com> wrote:
It's in dmrlink.cfg



Sent via smoke signal (AT&T 4G LTE)


-------- Original message --------
From: Robert Newberry <N1XBM@amsat.org>
Date: 12/24/2015 3:14 PM (GMT-05:00)
To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org>
Subject: [Allstar Digital] Playback

I edited /opt/dmrlink/playback/dmrlink.cfg
I did the same for playback_config.py in the same directory

I ran dmrlink.py and didn't get any errors. I the hit ctrl c and then ran playback.py I didn't see any errors. Although I'm not getting any echo.

Is there any things I should be looking at to troubleshoot?

Also I want to see the log live on the console, but I can't remember how.

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
   


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital




_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital