1) in /etc/asterisk/modules.conf enable usrp as

load => chan_usrp.so

2) in rpt.conf create a stanza like:

[1999]

rxchannel = usrp/192.168.1.182:34001:32001

duplex = 2

scheduler=scheduler

functions = functions-repeater

hangtime=0

authlevel = 0

Where the address and ports are configured to your network.

3) in rpt.conf add your node

[nodes]

1999 = radio@127.0.0.1:4570/1999,NONE

Now chan_usrp is ready to go.

On Fri, Dec 11, 2015 at 12:56 PM, David KE6UPI <dshaw@ke6upi.com> wrote:

Hello Robert, If you find out how to configure the Chan_USRP and asterisk please let me know. 

David

On Fri, Dec 11, 2015 at 9:28 AM, Robert Newberry <N1XBM@amsat.org> wrote:

Is the "readme.md" the documentation I should be reading for setting up DMRlink?

I've also been scanning dmrlink_SAMPLE.cfg for how to setup a parrot tg.

Thank you

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
   

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital