Thanks Steve,

I am having a couple issues with RPI1, should have probably used RPI2.

The allstar install scripts I’m using are yours also.

/srv/scripts/build_dahdi.sh

This command returns:

You do not appear to have the sources for the 4.1.16+ kernel installed.

This appears to finish fine, but no Asterisk binary that I can locate.

/srv/scripts/build_asterisk.sh

So, struggling a bit on the Pi1.

Thanks for any pointers,

Mike

From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com>
Organization: MSGStor
Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org>
Date: Saturday, January 30, 2016 at 10:28 PM
To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org>
Subject: Re: [Allstar Digital] First attempt

ah,
I need to check, but I may have to build a executable for you for the RPi1
I'll get back to you.

Steve

On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote:

My first attempt to start up /usr/local/bin/DMRGateway &

I get Segmentation Fault immediately.

Anyone else had that issue?

I have DMRLink working as a peer, connected to our C-Bridge.

I have AMBEserverGPIO working and listening on UDP.

Do not yet have Asterisk started, is that the issue?

Mike

kb8zgl
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital