Each dv3000 can only decode one TG at a time.
On Wednesday, May 11, 2016, Robert Newberry <N1XBM@amsat.org> wrote:Ya I suppose I better save copies of everything and try it. This would be the perfect ticket at home, I had a bunch of Motorola local remotes. I ended up connecting them directily to the USB FOB and made a "home radioless node" They sound superb on the air, I could monitor other DMR TG's besides my ASL ID.On Wed, May 11, 2016 at 2:48 PM, Steve Zingman <szingman@msgstor.com> wrote:If you have a active network in /opt/dmrlink/ambe_audio/dmrlink.cfg named [LSMFT] and a section named [LSMFT] in ambe_audio.cfg without a section= in the default ambe_audio.py will use the section [LSMFT] in ambe_audio.cfg
If you then add a section [yoursectionhere] with different gatewaydmrId, TgFilter, txTg, txTs those new values will be selected if you issue a echo -n "section=yoursectionhere" | nc 127.0.0.1 31002 from the Linux shell prompt.
On 5/11/2016 2:40 PM, Robert Newberry wrote:
I figured the names were arbitrary. I was mostly wondering if I was going to have a conflict having a brandmeister connection defined in /opt/dmrlink/bridge/drmlink.cfg and /opt/dmrlink/ambe_audio/dmrlink.cfg
On Wed, May 11, 2016 at 2:21 PM, Steve Zingman <szingman@msgstor.com> wrote:
The names I posted are only a example. use anything you want.
On 5/11/2016 1:59 PM, Robert Newberry wrote:
I get it kind of... I'm still a little confused.
I currently have the named section defined as. I use TG 42657 as my ID to access ASL.
[AMBE_PEER]
gatewaydmrId = 312307
tgFilter = 42657
txTg = 42657
txTs = 2
I put this right above what was already in the file so the next section is
[BM]
tgFilter = 3100, 31094
txTg = 3100
txTx = 2
So am I to assume that in my /opt/dmrlink/ambe_audio/dmrlink.cfg
that I should ass a section for BM with the relevant connection information? currently the only thing enabled is AMBE_PEER.
Will this be an issue since I already have a connection to Brandmeister already defined in /opt/dmrlink/bridge/dmrlink/cfg
Thank you.
On Wed, May 11, 2016 at 12:49 PM, Steve Zingman <szingman@msgstor.com> wrote:
It's easy to steer your DMRGateway via DTMF or CLI or AllMon or AndroidIAX. Consider the following snip from ambe_audio.cfg
section = BM # Use BM section values
# order of precedence: dmrlink.cfg, section=, DEFAULTS
[BM] # Listen to all, TX on TG3100 TS1
tgFilter = 3100,3106,31094 # A list of TG IDs to monitor. All TGs will be passed to DMRGateway
txTg = 3100 # TG to use for all frames received from DMRGateway -> IPSC
txTs = 2 # Slot to use for frames received from DMRGateway -> IPSC
[BM3100] # Brandmeister
tgFilter = 3100 # USA Nationwide
txTg = 3100
txTs = 1
[BM3106] # Brandmeister
tgFilter = 3106 # California Statewide
txTg = 3106
txTs = 2
[BM31094] # Brandmeister
tgFilter = 31094 # US call area 4
txTg = 31094
txTs = 1
[Sandbox] # Sandbox network
tgFilter = 3120
txTg = 3120
txTs = 2
[LOCAL] # Local network
tgFilter = 3
txTg = 3
txTs = 2
[Shutup] # Be quiet
tgFilter = 0
txTg = 0
txTs = 2
/etc/asterisk/rpt.conf
; DMRGateway Commands
73 = cmd,/bin/bash -c 'echo -n "section=Shutup" | nc 127.0.0.1 31002'
74 = cmd,/bin/bash -c 'echo -n "section=BM" | nc 127.0.0.1 31002'
76 = cmd,/bin/bash -c 'echo -n "section=DMR-MARC" | nc 127.0.0.1 31002'
77 = cmd,/bin/bash -c 'echo -n "section=BM3100" | nc 127.0.0.1 31002'
78 = cmd,/bin/bash -c 'echo -n "section=BM3106" | nc 127.0.0.1 31002'
79 = cmd,/bin/bash -c 'echo -n "section=BM31094" | nc 127.0.0.1 31002'
Issue a *73 from a radio (simplified for example) and ambe_audio will use the section [Shutup]
Issue a *77 from a radio (simplified for example) and ambe_audio will use the section [BM3100]
Replace radio with CLI or AllMon or AndroidIAX.
Add a script to cron
...
Available remote control commands:
'reread_subscribers'
'reread_config'
'txTg'
'txTs'
'section'
'gateway_dmr_id'
'gateway_peer_id'
'restart'
'playbackFromFile'
'tgs'
'dump_template'
'get_info'
See:
<https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayDiagram.pdf>
<https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.rtf>
<https://github.com/N4IRS/DMRGateway/blob/master/DMRGatewayTechOverview.pdf>
For INAD, 73 Steve N4IRS
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
--
N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
www.radioguysrepeaternetwork.com
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
--
N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
www.radioguysrepeaternetwork.com
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
--N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657
www.radioguysrepeaternetwork.com