Understand, bridge.py is a Proxy.
What the master sees is ONLY what you point at it. Consider you have a bridge configured as a peer with the id 12345 pointing at the test master. the other IPSC network defined in dmrlink.cfg is a master as 54321. 12345 is bridged with 54321. You have a repeater defined as a peer with a ID of 98765. You have a second repeater defined as a peer with a ID of 56789. The test master will think all the traffic is coming from 12345. Clear as mud?

Steve

On 12/15/2015 11:41 AM, Michael Hebert wrote:

On the DMRlink config or the repeater? or both?

On Tue, Dec 15, 2015 at 8:33 AM, Steve Zingman <szingman@msgstor.com> wrote:

If you point a peer at the test master, please us a repeater id that matches one of your AllStar nodes. That way I can see where the traffic is coming from.

On another note, there is a bug in the mk_dmrlink script. It does not copy the sample playback configuration file into the playback directory.
from the root prompt:
cd /opt/dmrlink/playback
cp ../samples/playback_config_SAMPLE.py playback_config.py

--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital