Steve : I was already using the procedure
last version . reinstalled and checked all twice .
ThumbDV responds normally to test and also
in DMRGateway screen….
Same result ( NO AUDIO) on DIAL_RAT_RC1 or
on Raspbian Jessie
( I figured out my first problem with
Jessie )
Corey : I will send you a copy of your
email to Ben VE2VB so he can contact you . BM server 3021
does not answers back to my Peer connection on port 55001
. BM 3108 does respond properly with same config….
Could you suggest Ben which TG I should
use for testing the setup ?????
Questions to help me troubleshoot :
DMRGateway..ini entry for
outputAudioDevice = /dev/null Will a suitable audio device
configured in DMRGateway.ini could confirm the
quality of the audio sent from AST Chan_USRP to
DMRGateway ???? Any clue on how to set up
audio devices on DIAL ????? Will try on Raspbian Jessie….
My mmdvm repeater is also hooked to BM3108
on port 62031 … Could there be any conflict running 2
apps to a BM server from the same public IP ?????
( 2 different Rpi3 inside)
Is there another TG that is known to work
properly on BM3108 with DMRGateway ??????
Can you confirm that Hoseline is working
properly with SmartPtt apps ?????
Here is a file of all the apps screen
startup upu to PTT release + my .ini …
Is there a audio test that can be done
using Windows or Linux for ThumbDV ( Kind of a Loopback
test ???)
Thanks
Richard
Provenance : Courrier
pour Windows 10
Richard,
Take a look at <https://github.com/N4IRS/DMRGateway/raw/master/Draft%20DMRGateway%20Install%20notes.odt>
Pay attention to the testing of communications with the DV3000
73, Steve N4IRS
On 04/12/2017 11:33 PM, Richard Aubin
wrote:
I am not very hot in Brandmeister
opération and configuration. ..
My DMRlink can log on server 3108.on
port 55001.
The Last Heard windows shows every
transmission I make on TG 3027.
Every transmission from DMRlink
triggers the ptt on my repeater on tg3027. But ..... No
audio except a low level hish ....
Is there something more that needs to
be done on the server.?????
I asking because I don't have a clue.
I contacter Ve2vb Who is looking
after BM 3021 for info abt their SmartPtt
port. Waiting for his answer....
Thanks for your help.....
Le 12 avr. 2017 6:14 PM, "Corey Dean"
<n3fe@repeater.net>
a écrit :
Have
you been setup on the server for smart Ptt?
Corey
n3fe
Sent from my iPhone
Hi to everyone .
My DMR Gateway software suite
is installed and all the testing in the
procedure are OK..
I am connecting to
Brandmeister 3108 port 55001 TG 3027 .
All response are OK .
The Brandmeister site shows my
DMRlink on the Last Heard window as a Smart
PTT Bridge
My DMRGAteway windows shows
the connection to 127.0.0.1 port 31000 and
to my
AST USRP 34001
When I do PTT and test audio
from Iaxrpt connected to my node .
The RED and Green leds on th
Thumbsb are flashing. LH list on the server
is updated .
My DMRGatewy windows shows
“Connected ( PTT asserted)” and
“Disconnected ( PTT off)” when released
My ambe_audio windows shows
`” INFO Transmit from gateway to TG3027:”
then “INFO Transmit complete “ on PTT
release
My test MMDVM repeater opened
on TG 3027 receives a PTT from network.
BUT No audio ( only faint high
frequency buzz )
No activity on Hoseline even
if Last Heard is being updated.....
Any hints as how to test the
ThumbDV output ???
Have been experimenting with
the outputAudioDevice in DMRGateway.ini
without success.....
Deffective ThumbDV ?????? . How
can I make shure ????
Also I am hearing some audio
out on AST node that is not coming from
TG3027 ??????
My entry in ambe_audio.cfg is
TGfilter = 3027,4327
Loaded the system twice from
scratch and ..... Same.....
Thanks
for any advice
Richard
VE2DJE
Provenance :
Courrier pour Windows 10
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital