Search the app_rpt list. I posted a link to the cases we are using. They are well made metal cases with a grill for warm air release.

On 01/24/2016 07:43 PM, Robert Newberry wrote:

Unless I'm missing something, the clear vilros case is too thin. There is a cut out for the pass thru pins, but not enough thickness in the case to allow it to be snapped back. I'll have to take measurements and check amazon. I was just curious for anything specific you guys were using.

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
   

On Jan 24, 2016 7:18 PM, "Steve Zingman" <szingman@msgstor.com> wrote:

I cut off the "pass through" pins. I did not need them, so the Pi and the DV3000 fit in my cases..

On 01/24/2016 03:19 PM, Robert Newberry wrote:

I was putting my DV3000 together with my RPI2 and I noticed my clear vilros case with no longer fit together.

Anyone have any case suggestions?

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital