Thanks Steve.

Still trying to wrap my head around the DMRGateway diagram.

Hopefully, I can give you a short run down of how I think it should run it

1. Configure dmrlink in /opt/dmrlink/ambe_audio. It will need to have a master for the repeater to peer with

2. I think the default ambe_audio.cfg should work

3. I think the default DMRGateway.ini should work

3. Run DMRGateway. Are you running as a process? DMRGateway &

4. Run python2 ambe_audio.py &

5. Everything should be running, test audio to and from DMR and AllStar

Michael KD5DFB

On Fri, Dec 18, 2015 at 6:58 PM, Steve Zingman <szingman@msgstor.com> wrote:

Michael,
You are good, that's a warning because of the changes from init.d to systemd it is expected and normal.

Steve

On 12/18/2015 07:55 PM, Michael Hebert wrote:
Steve,

I received my PiDV this afternoon. I was going thru and making sure I had all the dependencies taken care. I notice there was a problem with update-rc.d AMBEserverGPIO start 50 2 3 4 5

root@repeater:/srv/DV3000# cd /etc/init.d

root@repeater:/etc/init.d# update-rc.d AMBEserverGPIO start 50 2 3 4 5

update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults

I hope to have everything up and running tonight. I will have node 28304 link to my dmr repeater.

Michael KD5DFB
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital