John is of course right. If you plan to use the RPi GPIO for other external devices, keep the pins. I bought a few very nice metal boxes out of Eastern Europe for the project. I only planned on running DMRGateway so I cut off the pins. I have one of the boxes in "production" and the second for development. The way we did DMRGateway allows for everything to run on one Pi or many. For example, you could have a RPI2 running DMRLink DMRGateway and AllStar. A second RPI1 running the AMBE Server. For that matter, consider the idea of a third RPi1 also running AMBE server for Fusion. You could run DMR and Fusion on a singe AllStar node at the same time.

NO, we have no plans for fusion at this time. Our hands are full with DMR and maybe a little D-Star. ;)

On 12/15/2015 07:12 PM, John D. Hays wrote:
The pins can be used for radio monitoring and control applications -- see https://github.com/johnhays/udrc (not current, example only)

On Tue, Dec 15, 2015 at 3:51 PM, Mike Zingman <mike.zingman@gmail.com> wrote:
I still keep mine, Steve cut his off.  I keep thinking I may need them, but in the end, cutting them off lets you put the pi + dv3000 in a nice metal case.  Good RF shielding.


On Tue, Dec 15, 2015 at 6:49 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Did you guys leave the passthru pin in place? 

On Tue, Dec 15, 2015 at 5:44 PM, Steve Zingman <szingman@msgstor.com> wrote:
David,
When NW Digital radio announced the DV3000 we jumped at them. Mike bought one and I bought two. I'm very glad we did. It gave us a chance to start the development early. Took quite a while to get to this point, but what the heck.

73, Steve N4IRS

On 12/15/2015 05:30 PM, David KE6UPI wrote:
Well theirs is always Ebay to sell something that I can't use.. I'll play ball and get the USB one.. What the hack it's only 20 bucks more..

Now stop it. (LOL)

David


On Tue, Dec 15, 2015 at 2:21 PM, Mike Zingman <mike.zingman@gmail.com> wrote:
So, with all that said.  The USB version has some advantages with all of this.  It does not require a PI.  It can be used on other computers.  It is smaller.....


On Tue, Dec 15, 2015 at 5:19 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
Well I'm cheap (LOL) and the DV3000 is 20 bucks cheaper. I'll get one ordered.

Thanks, David

On Tue, Dec 15, 2015 at 2:16 PM, Mike Zingman <mike.zingman@gmail.com> wrote:
David,

We are using the DV3000.  We have NOT tested the ThumbDV.  It will probably work, but without testing it (we do not have one) I can not tell you if the gateway will work without issues.

Mike


On Tue, Dec 15, 2015 at 5:09 PM, John D. Hays <john@hays.org> wrote:

On Tue, Dec 15, 2015 at 1:17 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
Thanks Michael, Looking at the link should I buy the DV3000 or the DV3000u? What do you think?

David

On Tue, Dec 15, 2015 at 12:51 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
The dv4mini and the DV3000 are 2 different things. You will need the DV3000 to decode and encode the AMBE data to/from All star PCM

Node 2084 <----> USRP <----- DMRGateway <----- ambe_audio <---- Test Master 
                                                          |
                                                          |
                                                      DV3000
http://nwdigitalradio.com/products





On Tue, Dec 15, 2015 at 2:43 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
Duh I found the DMRGateway app. /usr/local/bin/DMRGateway

So a ran DMRGateway and get an error. 

root@DMR:/var/log/dmrlink# DMRGateway
DMRLink Gateway
dev: /dev/null
Audio In/Out Device: /dev/null
Open UDP listener on 127.0.0.1:1234
Open USRP on 127.0.0.1:32001
DV3000 not found at 127.0.0.1:2460
DV3000 not found!, aborting.

Are we using the DV4Mini in place of the DV3000?

David



On Tue, Dec 15, 2015 at 9:30 AM, Mike Zingman <mike.zingman@gmail.com> wrote:
David,

Where is the DMRGateway app?

On Tue, Dec 15, 2015 at 12:26 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
No Luck, 

I'm not using a DMR repeater. (I don't have one.) 

My setup.

RPi Dial Node 2084 --> USRP --> DMRLink peered to N4IRS. 

Should this work? I'm starting /opt/dmrlink/gateway/dmrlink.py . Should I be starting it under the bridge dir?

Thanks, David




On Tue, Dec 15, 2015 at 6:26 AM, Steve Zingman <szingman@msgstor.com> wrote:
Point a peer at the test master, either a repeater or DMRlink. If it's DMRlink, send the log to the console and set the log level to DEBUG. listen to the repeater or watch the screen. You will see the traffic.


On 12/15/2015 9:08 AM, Robert Newberry wrote:

OK I'll just drop it for now. I feel like I said that and reading your reply I still feel the same way. Anyways I'll just save on bandwidth and worry about when I need to cross that bridge.

Thanks

N1XBM
Apparare Scientor
Paratus Communicare
Allstar Node # 27086, 41540, 41812, 42086, 42658
    



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital




--

John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  


_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital




_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital




--

John D. Hays
K7VE

PO Box 1223, Edmonds, WA 98020-1223 
  



_______________________________________________
Allstar-Digital mailing list
Allstar-Digital@lists.keekles.org
http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital


-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic