I've setup a second repeater at another site. With the addition of the second repeater the DMR to ASL audio is slow and very slurred. Coming from ASL to DMR its sounds just fine. The strange twist on all of this is the second repeater DMR<->ASL in both directions clean/clear audio. Is it possible I am asking too much of the DV3000 and I need to have a second DV3000? Other than that both the repeaters play quite well on DMR from what I have observed. I've looked at the debug output and I'm not seeing anything that indicates a problem. Thank you -- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
I have multiple DMR repeaters sharing a connection with DMRGateway. re-check your configurations. Steve On 8/23/2016 3:37 PM, Robert Newberry wrote:
I've setup a second repeater at another site. With the addition of the second repeater the DMR to ASL audio is slow and very slurred. Coming from ASL to DMR its sounds just fine.
The strange twist on all of this is the second repeater DMR<->ASL in both directions clean/clear audio.
Is it possible I am asking too much of the DV3000 and I need to have a second DV3000?
Other than that both the repeaters play quite well on DMR from what I have observed. I've looked at the debug output and I'm not seeing anything that indicates a problem.
Thank you
-- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com <http://www.radioguysrepeaternetwork.com>
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
-- "Just say no to world domination"
You need one ThumbDV or PiDV (DV3000) per bidirectional audio channel. Multiplexing is not supported. You can share an AMBE server but only one stream at a time. On Aug 23, 2016 12:37 PM, "Robert Newberry" <N1XBM@amsat.org> wrote:
I've setup a second repeater at another site. With the addition of the second repeater the DMR to ASL audio is slow and very slurred. Coming from ASL to DMR its sounds just fine.
The strange twist on all of this is the second repeater DMR<->ASL in both directions clean/clear audio.
Is it possible I am asking too much of the DV3000 and I need to have a second DV3000?
Other than that both the repeaters play quite well on DMR from what I have observed. I've looked at the debug output and I'm not seeing anything that indicates a problem.
Thank you
-- N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
OK I only have one bidirectional audio stream. I have one private TG, that goes over to my ASL network of repeaters. I have two DMR repeaters and one dmrgateway server. I basically just added a peer to the network, I'm not sure what went wrong so I figured I'd ask before I started digging to see if the email list had any wisdom. The good news is that dmrgateway is capable of doing the job. Now to find out why it's not working. Thank you N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658, 42657 www.radioguysrepeaternetwork.com
participants (3)
-
John D. Hays -
Robert Newberry -
Steve Zingman