Thanks very much Steve ! I'll play with all of this, and update dmrlink during the week end. Will keep posted on how it goes Envoyé depuis mon téléphone intelligent Samsung Galaxy. -------- Message d'origine --------De : Steve Zingman <szingman@msgstor.com> Date : 17-04-07 06:08 (GMT-05:00) À : Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Objet : Re: [Allstar Digital] DMRGateway / DMRGui / DMRLink /ambe_audio /   DV3000u/PiDV Guy, The problems we had with ambe_audio on the new version of dmrlink has been fixed. You can do a git pull and copy ambe_audio.py to /opt/dmrlink/ambe_audio. I will be working on the configuration document next week. Really all that is left is pointing dmrlink.cfg at your master and configure ambe_audio.cfg. As far as DMRGui, thats what I get for using tinyurl. Lesson learned. ;( Here is a fresh link to DMRGui.zip <http://dvswitch.org/files/DMRGateway/DMRGui.zip> 73, Steve N4IRS On 04/07/2017 05:23 AM, Guy Vachon VE2VAG wrote:

Hello Steve,

Sorry for the delay in answering, was overloaded with work. Dunno if you still needed the test, but anyhow, I've tried again the command with and without the -n switch, and also 2 times back to back with the -n switch (if I understood correctly the test you asked for)  and still the same results

With the -n switch, the dongle never sends back the

...

0AMBE3000R Version 6100010031 Wrote: 5 bytes a11V120.E100.XXXX.C106.G514.R009.B0010411.C0020208 we are expecting.  When the –n switch is removed from the the command, I do receive it at the moment.

When I was making tests, I’ve checked the dongle’s serial baud rate with “stty -F /dev/ttyUSB0” and it stated at first that the dongle was at 460800 bauds. I bought my ThumbDV when they came out at first, way before the new model that is at 460800, so I knew mine was at 230400.

Even if i tried sending the command python “AMBEtest3.py -n -s /dev/ttyUSB0” after setting the serial baud rate baud rate at 230400 with  "stty -F /dev/ttyUSB0 230400", it would not work. Only way to ge the expected result was by removing the –n switch.

Also, the AMBEtest3.py python command with the –n switch removed always worked, even without trying setting the baud rate  of the dongle at 230400 before that.

BTW, I'm using the RC1 image from the links in your instructions. And the above tests were made without doing any git pull that I was in the posts made during the last couple of days.

On my side, I went thru all the instructions from your document, and I'm ready for the next part about the configuration.  But I know you, Mike and the rest of the team are working hard with bug hunting, so please keep up the good work and thanks for everything.

Also, in regard of my initial question about DMRGui, it was because the link for it in the files section of the DVhamswitch website sends us on a parked domain for sale at vyous.com, so that link is dead.  Just in case you didn't know.

73's from Guy VE2VAG _______________________________________________

Date: Wed, 5 Apr 2017 08:14:57 -0400 From: Steve Zingman <szingman@msgstor.com> To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] DMRGateway / DMRGui / DMRLink/ambe_audio / DV3000u/PiDV Message-ID: <6cf8d6ee-9f4d-4d17-da7a-cc124ea90ea9@msgstor.com> Content-Type: text/plain; charset="utf-8"; Format="flowed"

Guy, I do not have the first generation ThumbDV. Could you try with the -n switch and when it fails, try with the -n switch? No reboot between tests.

Steve

On 4/4/2017 9:18 PM, Guy Vachon VE2VAG wrote:

...

Richard, I was having the same problem as you, since I own a first generation ThumbDV which runs at 230400 bauds. When I removed the –n argument in the command: *python AMBEtest3.py -n -s /dev/ttyUSB0, *it then worked for me. So for people with first generation ThumbDV’s, the command *python AMBEtest3.py -s /dev/ttyUSB0 *must be used. Also, on page 3, Steve says at point 8: DO NOT edit DMRGateway.ini UNLESS your DV is not at /dev/ttyUSB0 If you run a first gen ThumbDV, the baud rate must be changed in it also to 230400. And for Steve: thank you very much for all the efforts in the software and the documents.  I went thru it all, and except for the items mentionned up here, everything went well and I’m ready for the next steps. Thanks and 73s from Guy VE2VAG

_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital