Chris, My answer: Sort of. ;) I have played around with connecting a Vertex EVX-5300/5400 to a RB_RIM_Lite. This seems to work quite well. I had contemplated making a plug on dongle for these radios, but they use a 15 pin high-density d-sub connector for the option port. There is no easy (cheap) way to mount this type of connector on a circuit board. My approach instead is to make a short cable that adapts the RIM's 9 pin connector to the 15 pin of the radio. You can check out the RB_RIM_Lite here: http://www.repeater-builder.com/products/usb-rim-lite.html As far as the adapter cable goes, I can supply the necessary parts for $5 extra and you can build the cable yourself, or I can provide the cable for $15 extra. NOTE: This solution will only yield a simplex radio connection to AllStar. (Think remote base) One would guess that a "Y" type cable could be built and use two radios (one dedicated for transmit, the other for dedicated receive) but I have not experimented with that plan as of yet. ;) Scott Scott Zimmerman Amateur Radio Call N3XCC 474 Barnett Road Boswell, PA 15531 On 9/21/2016 2:13 PM, Chris HIll/K7AZ wrote:

Just curious if there are any plans, kits or plug and play setups available to allow for DMR to / from AllStar connections?

Thank you, Chris K7AZ Lompoc CA

/Sent from my dumb-smart DROID.../

_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital