----- Original Message -----
Sent: Friday, August 16, 2013 6:20
AM
Subject: Re: [App_rpt-users] Mastr II and
URI low TX audio
Same question,
But also:
How are you adjusting the audio
in the radio?
The "normal" two places to inject are the MIC input, the
second is the PL input.
I can "see" the pot in my head, but don't
remember the number off my head for the deviation pot. You might be up against
the limiter.
Mark
KC5EVE
At 05:12 AM 8/16/2013, Ross
Johnson wrote:
Hey bob
Where are you
injecting the audio? There should be plenty of headroom. Is the mic still
connected?
Ross
www.kc7rjk.net
From:
Bob Roszkowski
Sent: Thursday,
August 15, 2013 8:12 PM
To: App_rpt-users@ohnosec.org
Subject: [App_rpt-users] Mastr II and URI low TX
audio
I have a Mastr II mobile tuned up in the ham bands.
Trying to set the audio levels. RX worked great. Problem with TX
audio, I can only get 2KHz deviation max if I set the level to 999 in
app_rpt. I am using the URI and have wired it to use the 6db amplifier
on board. Anyone else run into this problem?
boB -
W5EVH
_______________________________________________
App_rpt-users mailing
list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________
App_rpt-users
mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
__________
Information from ESET NOD32 Antivirus, version of virus signature database
8696 (20130816) __________
The message was checked by ESET NOD32
Antivirus.
http://www.eset.com
_______________________________________________
App_rpt-users
mailing
list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
__________
Information from ESET NOD32 Antivirus, version of virus signature database
8696 (20130816) __________
The message was checked by ESET NOD32
Antivirus.
http://www.eset.com