what is the format of the data ? is there a header or something to indicate PTT or does it just use the fact data is coming in and timeout after it stops.  Is there a way to set what codec is used in the channel ?  thanks 

Sent from an iPhone 6

On Apr 29, 2016, at 5:57 PM, Steve Zingman <szingman@msgstor.com> wrote:

Look at the usrp channel driver



Sent via smoke signal (AT&T 4G LTE)


-------- Original message --------
From: David Krauss <nx4y@verizon.net>
Date: 04/29/2016 5:55 PM (GMT-05:00)
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] simple udp interface

Is there a simple way to connect to asterisk/allstar via a udp socket ? I have a source of network audio that can source and receive raw PCM, 64K, 8 bit. I've looked at the rtpdir and  outbound-only RTSP drivers but can't quite figure out how they really work, at least not quickly,  and I was hoping someone already has this .. it needs to support COS and PTT signaling as well of course ..

Sent from an iPhone 6
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.