Why not use DIAL. It is far better than ACID. The old server location now has DIAL; download from allstarlink.org. If you kept your /etc/asterisk folder with your old .config files, you are a step ahead.

Thanks,
Bob
k6ecm
73

Sent from iPad


On Sep 1, 2016, at 4:49 PM, Steve Denbow <Kd8biw@hotmail.com> wrote:

All,

Reinstalling after a HDD crash, ACID (centos5) downloaded off the website (burnt to DVD). The original install went without a hitch about a year ago, however now it is not asking me for the network settings. As a result, I cannot download the phase2.sh script. I'm a noob to Linux, your help is appreciated. Thanks!

On Aug 31, 2016 6:29 AM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to
        app_rpt-users@ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
        app_rpt-users-request@ohnosec.org

You can reach the person managing the list at
        app_rpt-users-owner@ohnosec.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of App_rpt-users digest..."


Today's Topics:

   1. Fw: cop command 2 and 3 disable enable (petem001@gmail.com)
   2. Server IP target address (H Hugh Flint)
   3. Re: Server IP target address (Bob Pyke)
   4. Problems surrounding Dial with service asterisk stop and
      start along with restart (Loren Tedford)
   5. Re: Problems surrounding Dial with service asterisk stop and
      start along with restart (Steve Zingman)


----------------------------------------------------------------------

Message: 1
Date: Tue, 30 Aug 2016 15:03:25 -0400
From: <petem001@gmail.com>
To: "APP RPT" <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Fw: cop command 2 and 3 disable enable
Message-ID: <FDFAAE59BBC9400A96C9F248BF16FCF8@PierreMartel>
Content-Type: text/plain; charset="utf-8"

Sent this on Sunday. No answer yet.. Is it that complex?

From: Pierre Martel
Sent: Sunday, August 28, 2016 7:13 AM
To: APP RPT
Subject: cop command 2 and 3 disable enable

Hi I am working on a project to interface an allstar node on a multimode digital repeater based on the MMDVM

This would woould create a multimode fm,dtsar,fusion and dmr repeater system.

I know some people dont like that. but on a remote site where energy and antenna deployement difficult and for place where installing multiple repeater is price prohibitive, this is a nice solution. No mode is left aside. but only one can be used at once.

So in order to make this work I need to know how the cop 2 and 3 command works.

I want to use the event manager to send those 2 command when one input from my URI is switching state. this will be connected to the MMDVM and it will prevent the tx or false rx when the DVMDM is taking control of the repeater.

WHat happen to any audio received by the network when in disable mode?  IS it still present at the URI? Does the link that are present stay connected or they disconnect?

I need this so that I can figure out if it is more effective to use a pair of small relay to cut the audio lines and ptt lines when the MMDVM is active or doing it by software.

thanks

Pierre
VE2PF
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160830/497b9d82/attachment-0001.html>

------------------------------

Message: 2
Date: Tue, 30 Aug 2016 18:50:45 -0700
From: H Hugh Flint <hflint@centurylink.net>
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Server IP target address
Message-ID: <57be9b99-a7a2-68d3-5a3b-1eda383e4484@centurylink.net>
Content-Type: text/plain; charset=utf-8; format=flowed

I am currently working on an medium scale network. Trying to get Allstar
Link
ported through it.  I need the VOIP server IP target address to perform
the testing.

Thanks for your help,

H Hugh Flint, KF7LN


------------------------------

Message: 3
Date: Tue, 30 Aug 2016 22:06:48 -0700
From: Bob Pyke <k6ecm1@gmail.com>
To: H Hugh Flint <hflint@centurylink.net>
Cc: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] Server IP target address
Message-ID: <6FA9FAB7-7E31-4D92-9F43-509EF47778A3@gmail.com>
Content-Type: text/plain;       charset=us-ascii

I'm not sure what you mean by "the VOIP server." It seems to me the only VOIP servers are those built by folks to host their allstatlink nodes, which is based on app_rpt. Node linking is performed peer to peer, and not via a central server. The allstarlink registration server keeps track of the registered nodes' IP addresses and ports, which it sends out as a list to each node, which is used by the individual nodes to connect to each other. In DIAL, the node list is stored on each server in var/lib/asterisk/rpt_extnodes.

Thanks,
Bob
k6ecm
73

Sent from iPad


> On Aug 30, 2016, at 6:50 PM, H Hugh Flint <hflint@centurylink.net> wrote:
>
> I am currently working on an medium scale network. Trying to get Allstar Link
> ported through it.  I need the VOIP server IP target address to perform the testing.
>
> Thanks for your help,
>
> H Hugh Flint, KF7LN
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


------------------------------

Message: 4
Date: Wed, 31 Aug 2016 05:24:35 -0500
From: Loren Tedford <lorentedford@gmail.com>
To: app_rpt mailing list <app_rpt-users@ohnosec.org>
Subject: [App_rpt-users] Problems surrounding Dial with service
        asterisk stop and start along with restart
Message-ID:
        <CAK=eTyjUNYAXFFT+QJAgQZXrt3S5baxJ9xbNB5t0RpDiQ+cGYg@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Greetings I have found an issue today on a pure dial install out in a Data
Center environment where service asterisk stop and service asterisk start
did not work.. Anyone else having these issues with Dial?

Here is some other commands i tried instead..
root@hub:/etc/init.d# ./asterisk status
? asterisk.service - LSB: Asterisk PBX
   Loaded: loaded (/etc/init.d/asterisk)
   Active: failed (Result: exit-code) since Wed 2016-08-31 05:56:34 EDT;
22min ago
  Process: 19146 ExecStop=/etc/init.d/asterisk stop (code=exited,
status=0/SUCCESS)
  Process: 19289 ExecStart=/etc/init.d/asterisk start (code=exited,
status=1/FAILURE)

Aug 31 05:56:34 hub.kc9zhv.com asterisk[19289]: Asterisk is already
running.  /etc/init.d/...w.
Aug 31 05:56:34 hub.kc9zhv.com systemd[1]: asterisk.service: control
process exited, code...s=1
Aug 31 05:56:34 hub.kc9zhv.com systemd[1]: Failed to start LSB: Asterisk
PBX.
Aug 31 05:56:34 hub.kc9zhv.com systemd[1]: Unit asterisk.service entered
failed state.
Hint: Some lines were ellipsized, use -l to show in full.
root@hub:/etc/init.d# ./asterisk forcestart
Usage: /etc/init.d/asterisk {start|stop|restart|reload|force-reload}
root@hub:/etc/init.d# ./asterisk force-reload
[....] Reloading asterisk configuration (via systemctl):
asterisk.serviceJob for asterisk.service failed. See 'systemctl status
asterisk.service' and 'journalctl -xn' for details.
 failed!
root@hub:/etc/init.d# ./asterisk reload
[....] Reloading asterisk configuration (via systemctl):
asterisk.serviceJob for asterisk.service failed. See 'systemctl status
asterisk.service' and 'journalctl -xn' for details.
 failed!
root@hub:/etc/init.d#


As you see above i still received failures to stop and start asterisk using
even this method

Any thoughts?

Anyone had any luck porting any of this to centos 7?

Considering making it part of a nethserver project i have been working on..


Loren Tedford (KC9ZHV)
Phone:
Fax:
Email: lorentedford@gmail.com
Email: KC9ZHV@KC9ZHV.com
http://www.lorentedford.com
http://www.kc9zhv.com
http://forum.kc9zhv.com
http://hub.kc9zhv.com
http://Ltcraft.net <http://ltcraft.net/>
http://voipham.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160831/e46996a7/attachment-0001.html>

------------------------------

Message: 5
Date: Wed, 31 Aug 2016 06:29:10 -0400
From: Steve Zingman <szingman@msgstor.com>
To: Loren Tedford <lorentedford@gmail.com>,     app_rpt mailing list
        <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] Problems surrounding Dial with service
        asterisk stop and start along with restart
Message-ID: <db28a305-c7ef-83eb-ae47-c966a4ad7f27@msgstor.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed"

Loren,
Yes it's a known issue. There is a problem with the init scripts. The
next version uses systemd. If you want to convert to systemd now see
<https://github.com/N4IRS/AllStar/tree/master/systemd>
Careful reading of the README.md may yield  another solution.

73, Steve N4IRS

On 08/31/2016 06:24 AM, Loren Tedford wrote:
> Greetings I have found an issue today on a pure dial install out in a
> Data Center environment where service asterisk stop and service
> asterisk start did not work.. Anyone else having these issues with Dial?
>
> Here is some other commands i tried instead..
> root@hub:/etc/init.d# ./asterisk status
> ? asterisk.service - LSB: Asterisk PBX
>    Loaded: loaded (/etc/init.d/asterisk)
>    Active: failed (Result: exit-code) since Wed 2016-08-31 05:56:34
> EDT; 22min ago
>   Process: 19146 ExecStop=/etc/init.d/asterisk stop (code=exited,
> status=0/SUCCESS)
>   Process: 19289 ExecStart=/etc/init.d/asterisk start (code=exited,
> status=1/FAILURE)
>
> Aug 31 05:56:34 hub.kc9zhv.com <http://hub.kc9zhv.com>
> asterisk[19289]: Asterisk is already running.  /etc/init.d/...w.
> Aug 31 05:56:34 hub.kc9zhv.com <http://hub.kc9zhv.com> systemd[1]:
> asterisk.service: control process exited, code...s=1
> Aug 31 05:56:34 hub.kc9zhv.com <http://hub.kc9zhv.com> systemd[1]:
> Failed to start LSB: Asterisk PBX.
> Aug 31 05:56:34 hub.kc9zhv.com <http://hub.kc9zhv.com> systemd[1]:
> Unit asterisk.service entered failed state.
> Hint: Some lines were ellipsized, use -l to show in full.
> root@hub:/etc/init.d# ./asterisk forcestart
> Usage: /etc/init.d/asterisk {start|stop|restart|reload|force-reload}
> root@hub:/etc/init.d# ./asterisk force-reload
> [....] Reloading asterisk configuration (via systemctl):
> asterisk.serviceJob for asterisk.service failed. See 'systemctl status
> asterisk.service' and 'journalctl -xn' for details.
>  failed!
> root@hub:/etc/init.d# ./asterisk reload
> [....] Reloading asterisk configuration (via systemctl):
> asterisk.serviceJob for asterisk.service failed. See 'systemctl status
> asterisk.service' and 'journalctl -xn' for details.
>  failed!
> root@hub:/etc/init.d#
>
>
> As you see above i still received failures to stop and start asterisk
> using even this method
>
> Any thoughts?
>
> Anyone had any luck porting any of this to centos 7?
>
> Considering making it part of a nethserver project i have been working
> on..
>
>
> Loren Tedford (KC9ZHV)
> Phone:
> Fax:
> Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com>
> Email: KC9ZHV@KC9ZHV.com <mailto:KC9ZHV@KC9ZHV.com>
> http://www.lorentedford.com <http://www.lorentedford.com/>
> http://www.kc9zhv.com <http://www.kc9zhv.com/>
> http://forum.kc9zhv.com <http://forum.kc9zhv.com/>
> http://hub.kc9zhv.com <http://hub.kc9zhv.com/>
> http://Ltcraft.net<http://ltcraft.net/>
> http://voipham.com
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20160831/a0df782e/attachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users


End of App_rpt-users Digest, Vol 90, Issue 25
*********************************************
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.