Well, Thanks for that but "I wonder if the parameters are in milliseconds or seconds"?Problem is from using iaxRPT to test what I was doing.It sends a string after a completed dtmf entry.Before I could finish entering the string in iaxRPT -autopach dialtime was timing out from the lack of 1st digit not yet received because the program is sending it as iax data in a string.
I don't have it in front of me know but it might change things if I were not sending it as iax through the program as a direct entry but engaging the tx and sending. I'll try that one tonight. I guess it's dependant on the iaxRPT program. It's not a problem on radio side.
...mike/kb8jnm-------- Original Message --------
Subject: Re: [App_rpt-users] Phone Patch DTMF Time to Dial ?
From: Andrew Sylthe <asylthe@kc9ona.com>
Date: Wed, February 19, 2014 12:43 pm
To: "mike@midnighteng.com" <mike@midnighteng.com>
Cc: app_rpt-users@ohnosec.org
Hello Mike,I found the following app_rpt Autopatch howto:There appears to be a dialtime= setting that allows you to specify time allowed between DTMF digits. I'm not sure if that's what you're looking for or not. I would have to see your asterisk dialplan / configuration to help diagnose further.On Wed, Feb 19, 2014 at 9:15 AM, <mike@midnighteng.com> wrote:
Hello All,I am looking for the timer/setting for the length of time I have to enter a DTMF string while conducting a phone patch. I keep getting cut off because of the pre-dial string I have selecting the external PBX and trunk of the outgoing line (many digits total).It seems to be less than 4 seconds.Got any experience with this one?...mike/kb8jnm
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.--
Andrew Sylthe
KC9ONA
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.