Skyler, welcome to the experience, and
congrats on your repeater.
sshd_config port 22 is ok
To access your server just enter the IP
address: “10.0.1.1” for Host. The server may display “root@”
etc, but that is not part of the host descriptor.
I have my rpt called sounds located in
/var/lib/asterisk/sounds/rpt
When you call a sound from rpt.conf, just
use its name, and not the extension (leave off the .ulaw)
Remember, Linux is case sensitive: “sound”
does not equal “Sound”
It appears your third and last question
are related. I suspect your node is not registering with Allstarlink.org. You
have something missing or a typo in a configuration file. Check
extensions.conf, iax.conf, and rpt.conf.
Thanks,
Bob
kk6ecm
From:
app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Skyler F
Sent: Friday, April 18, 2014 7:14
AM
To: app_rpt-users@ohnosec.org
Subject: [App_rpt-users] Changing
Courtesy Tones,and SSHing into the computer
Hello,
I am new ham in high
school, and finally got a little SIMPLEX repeater up and running.
My first
question
Is about SSHing into the computer remotely. I first
gave it a try on my LAN, because I knew port forwarding would not be required.
First, I Changed the port
222 to port 22 on the SSHD_Config file
We are using an apple
airport router, which states the LAN address of the Ethernet port is 10.0.1.1.
I typed ssh root@10.0.1.1,
and I got a connection refused.
I was able to reverse SSH back to my macintosh using ssh
username@computersLANip from ACID, but when I tried to SSH back to acid, it
would not work. Just Connection Refused.
After I login on ACID it says Root@Skylersnode, my node, and I also
gave ssh root@<node number> and ssh skylersnode@local IP a try, but still
no success.
Are there any suggestions on getting this to work?
Second question: Courtesy tones,
I just figured out how to create a ULAW on audacity, and mount a flash
drive on the command, and I am wondering if I can change the courtesy tones or
any other audio file. Like the "I OWN COMMAND" annoying thing.
Where would the courtesy tones be located, and under what file name?
Third
question: why it wont work on the web transceiver
When I dial in the node
on the web transceiver, nothing happens, and when I hit the connect button, it
does not do anything. Is there any way to get it to work, or will the web
transceiver not work with my node. I would think it should work, because I have
almost the same setup as Willem's node, 29571
,on saddle back mountain.
Last
Question: Won't connect to 28298 or 28299
This node is part of the
FUN system here in
Thanks
Skyler KDØWHB