Ron.. See the below message when I enter the command
asterisk -rvv And yes, my DMK URI is plugged in and it's green LED is
lit.
Sent: Tuesday, December 20, 2011 8:19 PM
Subject: Re: [App_rpt-users] Asterisk Install
Help!
Jim,
It sounds like you have a ways to go with this project!
First thing is to login, now that you have the prompt. So where it
asks you to login, type "root" and then your password. That should get you
to the prompt on the terminal session.
This software all runs from a
terminal, there is not a GUI to reduce the learning curve. So you will be
at the command prompt for all the work. Are you currently a Linux
user?
What you are installing with the ACID install is a Linux
distribution called CENTOS ver. 5.7 and the Asterisk PBX plus the app_rpt
repeater control program. Asterisk+app_rpt is both a server and an
application. You should approach it as a server that you will be
configuring to control your repeater or node radio. You do have a built in
applicaton which you can access by typing "asterisk -rv" from the command prompt
in the terminal. You will then be presented with a prompt that looks like
this.
[root@test asterisk]# asterisk -rvv
Asterisk , Copyright (C)
1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk
comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for
details.
This is free software, with components licensed under the GNU
General Public
License version 2 and other licenses; you are welcome to
redistribute it under
certain conditions. Type 'core show license' for
details.
=========================================================================
Unable to connect to remote asterisk (does /var/run/asterisk.ctl
exist?)
Thanks Ron
73
Jim W7RY
Connected to Asterisk currently running on test (pid =
2572)
Verbosity is at least 3
test*CLI>
This will not work
out unless you have the USB FOB connected. The GMK URI is a good
choice. If it is connected, you will be able to configure the
node.
Hope this helps you to move forward. Write if I can be of
further assistance, or if I completely miss understood the question, rephrase it
and I'll try again. Hi Hi
Ron Morell
KA7U
Oh... One more thing... Do you have to have a server and a node? The web site is a bit un-clear on this. I just want to have a node that will connect to other nodes and the WIN System Allstar
reflector.
Thanks!
73
Jim W7RY
From: Jim W7RY
Sent: Tuesday, December 20, 2011 7:08 PM
To: App_rpt-users at ohnosec.org
Subject: [App_rpt-users] Asterisk Install Help!
Group.. I'm having some issues getting a new node set up and have some questions. Not sure if this is the right forum or not.
I successfully loaded the OS twice.. I apparently mistyped my password when the install asked me for it. After I put it in in-correctly, the screen went to a login prompt... now I cant
figure out how to re-start the install without starting from square 1. I've searched the internet and found little information on the actual node install.
Can anyone point me to some?
Thanks!
73
Jim W7RY
--
No virus found in this
message.
Checked by AVG - www.avg.com
Version: 2012.0.1890 / Virus
Database: 2109/4693 - Release Date: 12/20/11