Mac,
The RPi2 install is pretty much download the image, burn it to SD card,.
Once the Pi boots, you can login on the HDMI / USB console, or SSH into the board on port 222.
The board is setup for DHCP so check your DHCP (router) server for address.
If you want, you can login via the built in serial port at 115,200
System will walk you through setup.

FAQ for DIAL is at:
<http://docs.allstarlink.org/drupal/node/170>

73, Steve N4IRS
 

On 10/27/2015 10:20 AM, N7MTC . wrote:

Is there a procedure for loading the "new" DIAL version of asterisk for Raspberry pi2?  

 

I am looking to connect either a Pi2 or an intel NUC to a Yaesu Dr-1x using the Arcom RC-210 and  the Arcom ADR.  I noticed DIAL has replaced ACID as the latest flavor of asterisk for both PC and PI2.  I have not found any install write-ups or YouTubes showing a DIAL install.

 

Regardless of which platform I will need to use an USB to Serial adapter to connect the ALLSTAR node to the repeater controller.  It will be of the FTDI chipset either a trendnet Tu-s9 or a GearMo USB RS-232.

 

 

/73

Mac, N7MTC

 

 

Benjamin Franklin - "Those who surrender freedom for security will not have, nor do they deserve, either one."

  


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.