Subject: Re: [App_rpt-users] Incoming connects
From: tim.sawyer@mac.com
Date: Fri, 10 Jan 2014 20:29:46 -0800
CC: app_rpt-users@ohnosec.org
To: doug@crompton.com
Do a “tcpdump port 4569” at the Linux command line and incite a connect from another node. You should see inbound packets.
I have seen ISP’s block port 4569 but not FiOS. I’m on FiOS with an actiontek router and it works fine.
I am remotely trying to troubleshoot a friends new Allstar installation. I can ssh in and connect out to nodes but I cannot connect in to the system from external nodes. Port 4569 is forwarded.
I discovered this link -
http://www.voip-info.org/wiki/view/IAX
about consistent NAT and I was wondering if that might be the problem.
I was able to connect in one time right after a reboot which might support the NAT issue.
The router is an Actiontek MI424WR GigE as supplied by Verizon on their FIOS system.
Is anyone else having a problem with this router or have any ideas on this? Nothing is logged at the server or shows up in the client on the system which kind of points to a routing failure.Is there a good way to check for open port 4569 as I don't think normal port scan programs will check this.
73 Doug
WA3DSP
http://www.crompton.com/hamradio
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users