From what I've read...I think the codes you are trying to pass must be different than the starting character (i.e. *), since once Allstar sees a sequence it will mute everything past that.

Tony

On 01/24/2011 11:34 AM, VE3GIH Gordon Hewit wrote:

KE2N Ken suggested using the propagate_dtmf command in the rpt.conf file, as a way to propagate DTMF signals to other nodes. I need this capacity to allow our members access to the local phone patch. However with all nodes set to duplex=2 (full duplex) and propagate_dtmf=yes, I'm still not getting DTMF on the other local repeaters. The asterisk console sees the DTMF, but Asterisk isn't passing the digits onwards.

Does anyone have a suggestion about what else I can try?

VE3GIH Gord

______________________________________________

Date: Sat, 22 Jan 2011 09:42:49 -0500 (EST)
From: Ken <ke2n@cs.com>
To: n3fe@repeater.net, telesistant@hotmail.com,
app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] DTMF Allow

Cory

I think there is a setting for this

propagate_dtmf= see http://209.159.155.200/drupal/node/134
<snipped>
GL
Ken
KE2N

Gordon Hewit
289-800-1473 (home)
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users