Off list:
Bill,
What can you tell me about your SNMP monitoring. Nothing to do with your issue. I am considering adding SNMP to ASL.
I'll comment on the list about your issue, so it gets archived and all can read.

73, Steve

On 3/16/2017 1:48 PM, William Higgins wrote:
Let's see if I can answer the questions that have been asked:

Steve Zingman:  I believe the dropouts are primarily on receiver input.  I've not noticed them on Echolink inbound traffic.  The CPU load is minimal.  Generally under 2% used.  We are using USB_RADIO without DSP (I couldn't make that work initially for some reason.)

Steve Agee:  As I said, the CPU load is minimal.  There might be tiny momentary peaks, but there is no sustained load on the processor.

Neil K8it:  The wireless connectivity doesn't "seem" to be a problem.  The router to which it is connected is only about 4 ft. away.

Thank you all for the suggestions.  Would love to hear any other ideas you have!

Bill Higgins
N0NOE

KC0DBS - 44011
N0NOE - 43758





_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.