OK, I see in the copy of rpt.conf.sample right now

 ;92=cop,3     ;system disable

So in theory I would want to change 92 to something I would prefer like your using 950 and 951.

I think I have that right!

Thanks


On Fri, Sep 27, 2013 at 10:32 AM, Tim Sawyer <tim.sawyer@me.com> wrote:
System disable turns off the transmitter. 

To use cop 3 you would add it your [functions] section in /etc/asterisk/rpt.conf for example:

950 = cop,3    ; Disable system
951 = cop,2    ; Enable system

Now *950 will turn off the system and *951 will turn it on.
--
Tim
:wq

On Sep 27, 2013, at 6:42 AM, Robert Newberry <N1XBM@amsat.org> wrote:

Well I'm making headway here. Now I'm confused again. I was looking at a way to have the URI stop asserting the PTT line after hearing a certain DTMF.

I see cop, 3 ;system disable.

Does this mean DTMF 3 will disable the system? I noticed on ohnosec the rpt.conf.sample it says change these to something other than listed below.

Also what exactly happens on a system disable?

Thank you

Apparare Scientior
Paratus Communicare
-N1XBM

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users