It does not work for me as stated earlier in the thread.


> >> I have 2 repeaters on the same box, and each one of the have a unique
> >> courtesy tone. But when I link them, they loose that courtesy tone and start
> >> using remotetx which makes it so both repeaters have the same CT.
> >> So I went in to the rpt.conf file and under the nodes I change
> >> "telemetry=telemetry1" for node 1 and "telemetry=telemetry2" for node 2.
> >> Then under "[telemetry1]" I define a diffrent remotetx ct. but that did not
> >> work. It seems that the line "telemetry=telemetry1" does not work.




On 5/29/2012 11:26 AM, Jim Duuuude wrote:

what do you mean... it already does that

JIM

> Date: Tue, 29 May 2012 10:53:47 -0700
> From: ke6sth@ke6sth.ampr.org
> To: app_rpt-users@ohnosec.org
> Subject: Re: [App_rpt-users] courtesy tone issue when linked
>
>
> Is there going to be plans for "telemetry=" under the node config can
> be define to different telemetry list for each node?
>
> http://ohnosec.org/drupal/node/124
>
>
>
> --Sione
>
>
> On 5/25/2012 9:57 AM, Sione Ragle wrote:
> > Thanks Scott,
> >
> > The doc here http://ohnosec.org/drupal/node/124 is what made me get my hopes
> > up :)
> >
> > Would been nice if it worked, and the same for events. So I can keep things
> > separate between the 2 repeaters.
> >
> > --Sione
> >
> >
> > On 5/25/12 9:43 AM, "Scott Weis"<kb2ear@kb2ear.net> wrote:
> >
> >> It would appear the telemetry= is not implemented in the code. So there can
> >> be only one [telemetry] stanza.
> >>
> >> -----Original Message-----
> >> From: app_rpt-users-bounces@ohnosec.org
> >> [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Sione Ragle
> >> Sent: Thursday, May 24, 2012 11:45 PM
> >> To: app_rpt-users@ohnosec.org
> >> Subject: [App_rpt-users] courtesy tone issue when linked
> >>
> >>
> >> I am struggling trying to figure this out.
> >>
> >> I have 2 repeaters on the same box, and each one of the have a unique
> >> courtesy tone. But when I link them, they loose that courtesy tone and start
> >> using remotetx which makes it so both repeaters have the same CT.
> >> So I went in to the rpt.conf file and under the nodes I change
> >> "telemetry=telemetry1" for node 1 and "telemetry=telemetry2" for node 2.
> >> Then under "[telemetry1]" I define a diffrent remotetx ct. but that did not
> >> work. It seems that the line "telemetry=telemetry1" does not work.
> >>
> >> Thanks
> >> --Sione
> >>
> >>
> >>
> >> _______________________________________________
> >> App_rpt-users mailing list
> >> App_rpt-users@ohnosec.org
> >> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users@ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users