I will poke around on Saturday to see if I find a copy of the failed script archived on my laptop, but I fear it was overwritten. Big mistake, if that occurred. This is not a script so much as it is the typical Dial R Pi lines that allow the PC IaxRpt client to work, but also allow the Android application to work. In some ways, it would seem to be the same parameters. Maybe it requires and if/else conditional statement. I just don't know. I could not sleep, and I needed to take medication, so I decided to shine a light on this. 

It was suggested this may be a limitation of the R Pi. I find that difficult to accept when it can run Allmon2, and many common but ancient programs like groff are in the file system. It is not much different than UNIX file systems I used to keep civilian and military aircraft in the sky.

Thanks...

Bill KB9WKR

Sent from my iPad

On Oct 8, 2016, at 3:12 AM, Steve Zingman <szingman@msgstor.com> wrote:

What is the script?

On Oct 8, 2016 3:06 AM, Te Bussell <welfarecat@comcast.net> wrote:
I downloaded the Android app on my Samsung phone based on the message quoted below. I have IaxRpt working from my laptop along with Allmon2. I had some help from a brilliant young woman, and I thank her.

HERE IS THE PROBLEM:  when she tried to set up the script to work with both Android and PC IaxRpt, the script had a syntax error, and would not work. 

I used to modify and write UNIX scripts for an ancient but capable aerospace publishing system. I know that a misplaced or unbalanced operator will fail. Most of my scripts were ksh, and I knew a method in those days to actually test the script within a command line environment. Sorry to say I have cobwebs on what I did in the past.

So it would be helpful to see an example of a script that accomplishes both goals as stated above. In addition, I don't see a way forward for setting up the Android app.

Cheers and 73

KB9WKR

Bill


Sent from my iPad

On Sep 26, 2016, at 8:54 PM, Te Bussell <welfarecat@comcast.net> wrote:



Sent from my iPad

Begin forwarded message:

From: Steve Zingman <szingman@msgstor.com>
Date: September 26, 2016 at 1:25:56 PM EDT
To: no1pc@yahoo.com, "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org>
Subject: Re: [App_rpt-users] IAX/Zoiper Audio and Level

There is a Android app written to connect to AllStar. It has a mic gain control.
<https://play.google.com/store/apps/details?id=org.dvswitch>

On 9/24/2016 8:12 PM, no1pc@yahoo.com wrote:

Just got things setup so Zoiper works on my node.

I can connect and pass voice from PC client and Droid clients - but the
audio level from those going out to the Transmitter is low.  Is there a
way to adjust that?

The iPhone client connects but does not yet pass voice... still working
on that.


_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.


--
"Just say no to world domination"
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.