Best thing is to try it :-)
As I understand it, ACPI looks after power management. You may be able to run without it.
I'm glad it had an effect as it helps to localise the problem.
Does your LAN adapter come up? If so you could be well on the way.
David
Hi
I tried the following and it did stop the error massages.
- Disable ACPI and reboot your system. You need to edit /boot/grub/grub.conf and modify kernel parameters as follows:
kernel /vmlinuz-2.6.18-53.1.4.el5 ro root=LABEL=/ vga=0x314 acpi=off
However I am not sure what ACPI does for the allstar link.
will this have any negative impacts?
or does this tell anyone
what the problem may be?
Chris
From: David Osborn <david.osborn@manx.net>
To: app_rpt-users@ohnosec.org
Sent: Monday, August 26, 2013 10:10 AM
Subject: [App_rpt-users] Asterisk ended with exit status 1
I claim no expert knowledge here but I was mucking around trying to get Acid running on a thin client – just for the heck of it really. Anyway, I got this error message, along with the log messages about a problem with the Zaptel Configuration, and I found a reference to this issue here:
http://www.easyasterisk.org/modules/smartfaq/faq.php?faqid=1
Booting the thin client with ACPI disabled cured the problem with Zaptel, but then the LAN port wouldn’t come up L so I was still stymied!
Anyway I don’t know if this will help, but it might be worth a go.
David Osborn
GD4HOZ
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users