On 11/16/18 11:34 AM, Jeff Lehman wrote:
> Hi All,
>      I have a feeling I will facepalm myself for this one. I want to be
> able to connect a link in RX only mode (NOT local monitor) via a macro, but
> I cannot for the life of me find the command or COP functions to do it. I
> know it is possible in Allmon, but I need to be able to do it in a macro.

There's ilink,2, which is mapped to *2[NODE] to connect a node in receive only.

You would then define a macro like 42 = *240821#, and call it via *542 from
the repeater.

--
Bryan Fields

727-409-1194 - Voice
http://bryanfields.net
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.