OK Jamey, I didn't see a reference to the other file in your email.

In extensions.conf you need a Stanza  like:


[myphone]
exten=XXXXX,1,rpt(XXXXX|P)   ;CHANGE THE XXXXX TO YOUR NODE NUMBER


In IAX.conf you need a Stanza like

; Iphone IAX connection

[myiphone]
username=myiphone ; ZOIPER USER NAME
type=friend
context=myphone ; MATCHING THE STANZA IN EXTENSIONS.CONF
host=dynamic
auth=md5
; add a passsword of your selection for secret
secret=ZZZZZZ ;   YOUR PASSWORD
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
transfer=no
; add your call or your selection for callerid
callerid=


THIS IS AN EXAMPLE OF MY ZOIPER FOR IPHONE SETUP ON MY NODE


Robert Prybyzerski Jr
W2YMM
631-960-1051
http://www.w2ymm.com

On Wed, Apr 22, 2015 at 10:41 PM, Jamey Wright <Jamey.Wright@morgan911.org> wrote:
I did that.  That is the tutorial I used.


Jamey
WR4JW
From: Bob Prybyzerski [w2ymm1@gmail.com]
Sent: Wednesday, April 22, 2015 9:39 PM
To: Jamey Wright; app_rpt ALLSTAR
Subject: Re: [App_rpt-users] Config for Zoiper

You need to also make a modification to extensions.conf

Additional tutorial can be found at : 



Sent from my iPhone
Bob Prybyzerski W2YMM

On Apr 22, 2015, at 10:20 PM, Jamey Wright <Jamey.Wright@morgan911.org> wrote:

I found the tutorial for using Zoiper on an iPhone for connecting to Allstar nodes written by Bernie, W1BFC. I followed it to the letter and my device won't register. 

In iax.conf I have:

[myphone]
username=user
type=friend
context=myphone
host=dynamic
auth=md5
secret=mypasswd
codecpriority=host
disallow=all
allow=ulaw
allow=g726aa12
allow=gsm
transfer=no
callerid="wr4jw"

On the server after running asterisk -r i see the following;

NOTICE[2952] : chan_iax2.c:6839 register_verify: No registration for peer 'user' (from x.x.x.x)

What am I doing wrong here?

Thanks

Jamey
WR4JW

_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.