On 14/07/2013 17:28, N7LD@aol.com wrote:

I run quite a few Limey nodes. I have had this happen and it seems if you

wait 10-20 minutes it starts working. I think the node has to register first.

Also make sure the last thing that shows up on the monitor is ztttanscode loaded.

It will not work until you see that.

Lee

2233

Hi Lee,

I've emailed the login info to Jim, and he can have a look and see if he can see what I have done wrong (it has to be my fault - there are loads of Limey systems working perfectly well out there!). There has to be a subtle difference between ACiD and Limey that I have missed - I can use exactly the same setup, on the same box with a HDD running ACiD all day long!

I'll await Jim's response with interest! :)

James
29681