Yes me too!
I've tried to build ACID on a USB stick and come unstuck! :-P
I gave a up a few months ago so cant remember what the issues were now...
I also tried to build Limey but I think the builds that were available were not compatible with my motherboard which is an embedded system. The installer would run but just freeze at a point where it was "freeing up unused ram" and that was that.
Its a shame as I have loads of these embedded things in my shed waiting for a use!
Matt.
G4RKY
On 9 March 2011 21:28, Jon Rorke
<jrorke@cogeco.ca> wrote:
Well how do you go about setting that up on a usb drive? Are you using limey or acid???
I would like to do that too.
Jon VA3RQ
On 3/9/2011 4:11 PM, Corey Dean wrote:
Something I have been doing on these systems and some other friends have done is to remove the hard drive all together and use a USB memory stick. I have just seen too many hard drive failures in the past. Haven't lost a USB memory stick yet...
Corey N3FE
-----Original Message-----
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Mark Phillips
Sent: Wednesday, March 09, 2011 3:52 PM
To: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] How much space does an install of Limey comsume?
Think I just answered my own question ....
From the limeylinux FAQ
How much space does the distribution take up on the Compact Flash?
The current version takes up 80 MB of the total compact flash storage area.
On 03/09/2011 03:49 PM, Mark Phillips wrote:
Hi Folks,
How much disc space does an install of Limey consume? I bought a
diskless work station based upon an Atom 230 chip with 1GB of RAM and a
1GB built in flash card (removeable).
I'm wondering if I can get away with installing Limey on the 1GB flash
and thus not have to splurge on an HDD.
Thanks
Mark