You can always use the voter-demo.allstarlink.org server to test it.

Jim

Date: Sat, 19 Apr 2014 09:51:35 -0700
From: markjohnston73@gmail.com
To: tim.sawyer@mac.com
CC: app_rpt-users@ohnosec.org
Subject: Re: [App_rpt-users] RTCM voting setup

I just wanted to be sure everything was working before I buy a second RTCM and GPS... is there any other way to at least verify the GPS is working with this RTCM? As even the clock is never set...

On Apr 19, 2014 8:59 AM, "Tim Sawyer" <tim.sawyer@mac.com> wrote:
You need to have two GPS’ in order to vote. One for the master site and one remote.
--
Tim
:wq

On Apr 19, 2014, at 8:44 AM, Mark Johnston <markjohnston73@gmail.com> wrote:

Right I have a garmin 18x lvc trying to get it going as a voting site... first one..

On Apr 19, 2014 8:26 AM, "Tim Sawyer" <tim.sawyer@mac.com> wrote:
Having the PPS Polarity set to 2 tells the RTCM you do not have a GPS. That forces the RTCM to become a mix (non-voting) client. Turn it on, save it and restart. A simple voter.conf would look like this.

[general]
port = 667
password = BLAH

[1000]
Site1 = pswrd1,master,transmit
Site2 = pswrd2,transmit

--
Tim
:wq

On Apr 19, 2014, at 1:23 AM, Mark Johnston <markjohnston73@gmail.com> wrote:

10 - GPS PPS Polarity (0=Non-Inverted, 1=Inverted, 2=NONE) (0)



_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.