I struggled with something like this for a little while before I realized the DTMF tones from my Kenwood TH-G71A were not being decoded. Specifically the 3 digit.
then press every key on your DTMF keypad and watch what asterisk tells you. If they aren't decoding then find a radio that does (could also be RX audio level?).
From: "Mike" <mm@midnighteng.com>
To: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org>
Sent: Wednesday, July 18, 2018 8:50:27 AM
Subject: Re: [App_rpt-users] Simplex node problem
Reading your whole and previous message Jay,
I'm guessing you are not seeing results from your command ???
A successful command will at least give you a short kinda 'double
beep'... bip bip even when being issued via sched/macro if the tx is
up.
But one of the first things to look for if you are having issues
getting results from a command is to look for a conflicting commend
in your set-up.
Asterisk will always use the first match it can make anywhere in the
channel/stanza it can.
So if you had these commands
97
971
971 will never execute since 97 will get it first.
So if you then convert all 97 commands to 3 digits
970
971
Would fix this problem
Just something to look for.
One other thing is that if you are issuing a command for a shell
script cmd=
make sure the path is correct and permissions for the file are
correct
hope that leads you somewhere but I'm not sure I fully understand
your issue.
from the console or a ssh window, type ' asterisk -r -vvv ' ( -
three v's) to see how asterisk is responding to your commands.
...mike/kb8jnm
On 07/18/2018 09:36 AM, Tim Sawyer
wrote:
The command
complete (touch tone accepted) beep is different from the
courtesy tone. Is the beep the same as the courtesy tone?
A common
reason for no touch tone decoding with a simplex node is when
the node is in (the default) full duplex. Be sure you have a
duplex=0 statement in (usually near the top) your node stanza.
I have a simplex node setup with a
Baofeng 888. I receive ok (the periodic automated date
and time) but when I transmit a command, I just hear
a beep. On the Node Status page the "Total Keyups"
increments each time I attempt to send a command.
However, the "Total Commands Executed" remains at 0.
"Total Timeouts" is also 0. It's as if the command is
being received but not interpreted correctly? Any
ideas?
Thanks,
Jay
KI7SOX
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
and scroll down to the bottom of the page. Enter your email
address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via
email confirmation. If you have trouble unsubscribing, please
send a message to the list detailing the problem.
--
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.